Fixed interfaces of the USG6000

18

The USG6000 is delivered with diversified interfaces (with fixed interfaces being one type of standard interfaces). The standard configurations on various models are as follows:
-USG6310/6320/6510-SJJ: one console interface (RJ45),
one USG 2.0 interface, and eight 10/100/1000M autosensing Ethernet electrical interfaces in standard configuration.
-USG6306/6308/6330/6350/6360/USG6507/6530: one out-of-band management interface (RH45), one console interface (RJ45), one USB 2.0 interface, two GE combo interfaces, and four 10/100/1000M autosensing Ethernet electrical interfaces in standard configuration.
-USG6370/6380/6390/6620/6630: one out-of-band management interface (RH45), one console interface (RJ45), two USB 2.0 interfaces, four GE Ethernet optical interfaces, and eight 10/100/1000M autosensing Ethernet electrical interfaces in standard configuration.
-USG6650/6660: one out-of-band management interface (RJ45), one console interface (RJ45), one console interface (Mini USB), two USB 2.0 interfaces, eight GE optical interfaces, eight 10/100/1000M autosensing Ethernet electrical interfaces, and two 10GE optical interfaces in standard configuration.
-USG6670/6680: one out-of-band management interface (RJ45), one console interface (RJ45), one console interface (Mini USB), two USB 2.0 interfaces, eight GE optical interfaces, sixteen 10/100/1000M autosensing Ethernet electrical interfaces, and four 10GE optical interfaces in standard configuration.

Other related questions:
Fixed interfaces of the USG2000&5000
The USG2000/5000 is delivered with diversified interfaces (with fixed interfaces being one type of standard interfaces). The standard configurations on various models are as follows: -USG2110-F: two WAN interfaces, eight LAN interfaces, one console port, and one USB interface in standard configuration. -USG2110-F-W: two WAN interfaces, eight LAN interfaces, one console port, and one USB interface in standard configuration. -USG2110-A-W: one WAN interface, eight LAN interfaces, one ADSL interface, one console port, and one USB interface in standard configuration. -USG2110-A-GW (WCDMA 3G): one WAN interface, eight LAN interfaces, one ADSL interface, one console port, and one USB interface in standard configuration. -USG2110-A-GW (CDMA2000 3G): one WAN interface, eight LAN interfaces, one ADSL interface, one console port, and one USB interface in standard configuration. -USG2100: one WAN interface, eight LAN interfaces, one console port, one USB interface, and one flash memory interface in standard configuration. -USG2210/2220/2230/2250/2260: two GE combo interfaces (WAN interfaces), one console port, two USB interfaces, and one Micro-SD card slot in standard configuration. -USG5120: two Gigabit electrical interfaces (WAN interfaces), two GE combo interfaces (WAN interfaces), one console port, two USB interfaces, and one Micro-SD card slot in standard configuration. -USG5150/5160: four GE combo interfaces (WAN interface), one console port, two USB interfaces, and one Micro-SD card slot in standard configuration. -USG5520S/5530S/5530/5550: one console port, one 10/100/1000M management interface, two USB interfaces, four 10/100/1000M Ethernet electrical interfaces, and four GE combo interfaces in standard configuration. -USG5560: one console port, one 10/100/1000M management interface, two USB interfaces, four 10/100/1000M Ethernet electrical interfaces, four GE combo interfaces, and eight 100/1000M Ethernet optical interfaces in standard configuration.

USG6000 interface overview
USG6000 interface overview Interface types An NGFW supports physical and logical interfaces. 1. Physical interface a. Layer 3 Ethernet interface. Description: Works at the network layer to process Layer 3 packets with an IPv4 or IPv6 address specified and supports routing functions. b. Layer 2 Ethernet interface. Description: Works at the data link layer and processes Layer 2 packets, implementing rapid Layer 2 forwarding. 2. Logical interface a. Virtual template (VT) interface. Description: Helps a Point-to-Point Protocol over Ethernet (PPPoE) server with PPP negotiation or encapsulates Layer 2 Tunneling Protocol (L2TP) packets. b. Dialer interface. Description: Used by a PPPoE client. c. Tunnel interface. Description: Applies to packet encapsulation and decapsulation and IPv6 transition technologies. GRE and IPSec are common encapsulation protocols. d. Null interface. Description: Any packets transmitted over this interface are discarded. It is mainly used for route filtering. The null interface cannot be configured through the web UI. e. VLAN interface. Description: A Layer 3 logical interface that is assigned an IPv4 or IPv6 address. VLAN interfaces transmit packets between VLANs. f. Layer 3 Ethernet subinterface. Description: Layer 3 Ethernet subinterfaces are Layer 3 logical interfaces created on a physical interface. f. Layer 2 Ethernet subinterface. Description: Layer 2 Ethernet subinterfaces are Layer 2 logical interfaces created on a physical interface. h. Eth-Trunk interface (interface aggregation). Description: A logical interface that consists of multiple Layer 2 or Layer 3 Ethernet interfaces. An Eth-Trunk interface provides high bandwidth and reliability. i. Loopback interface. Description: Remains in the Up state and is assigned a 32-bit subnet mask.

Rate of uplink interfaces on S series fixed switches
The S2700 and S3700 provide GE uplink interfaces. The S1720, S600, and S5700 provide GE or 10GE uplink interfaces, depending on the model. The S6700EI provides 10GE uplink and downlink interfaces. The S6720EI and S6720S-EI provide 40GE uplink interfaces.

Static DHCP binding configuration on S series switch
In static DHCP binding mode, fixed IP addresses can be assigned to DHCP clients with specific MAC addresses. For example, you can assign fixed IP address 10.10.10.10 to a client with MAC address dcd2-fc96-e4c0 on an S series switch except an S1700 switch: - For a global address pool: [HUAWEI] ip pool 1 //Enter the view of an IP address pool. [HUAWEI-ip-pool-1] static-bind ip-address 10.10.10.10 mac-address dcd2-fc96-e4c0 - For an interface address pool: [HUAWEI] interface vlanif 10 //Enter the view of the interface for which an IP address has been configured. [HUAWEI-Vlanif10] dhcp server static-bind ip-address 10.10.10.10 mac-address dcd2-fc96-e4c0 Note: The configured IP address cannot be the same as the assigned one. If the configured IP address has been assigned, run the reset ip pool { interface pool-name | name ip-pool-name } { start-ip-address [ end-ip-address ] | all | conflict | expired | used } command in the user view to manually reclaim the IP address in an address pool.

Can the MAC bypass authentication function be configured on a fixed interface of the SRU
The MAC bypass authentication function cannot be configured on a fixed interface of the SRU, and it is supported on the interface card only.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top