Whether the USG6000 supports optional expansion cards

21

The USG6000 supports multiple types of interface cards to add the number of interfaces. It also supports bypass cards to enhance availability. Purchase them as required. The support of interface cards on models of various types are as follows:
-The USG6310/6320/6510-SJJ does not support optional expansion cards.
-The USG6306/6308/6330/6350/6360/6370/6380/6390/6507/6530/6620/6630 provides two WSIC slots for the optional 8GE-WSIC-8x1GE RJ45 interface card, 2xG8GE-WSIC-8x1GE RJ45 interface+2x10GE SFP+ interface card,
8GEF-WSIC-8×1GE SFP interface card, and 4GE-BYPASS-WSIC-2×electrical link bypass card.
-The USG6650/6660 provides six WSIC slots for the optional 8GE-WSIC-8x1GE RJ45 interface card, 2xG8GE-WSIC-8x1GE RJ45 interface+2x10GE SFP+ interface card,
8GEF-WSIC-8x1GE SFP interface card, and 4GE-BYPASS-WSIC-2xelectrical link bypass card.
-The USG6670/6680 provides five WSIC slots for the optional 8GE-WSIC-8x1GE RJ45 interface card, 2xG8GE-WSIC-8x1GE RJ45 interface+2x10GE SFP+ interface card,
8GEF-WSIC-8x1GE SFP interface card, and 4GE-BYPASS-WSIC-2xelectrical link bypass card.

Other related questions:
Whether the USG2000&5000 support optional expansion cards
The USG2000/5000 supports multiple types of expansion interface cards, which provide powerful interface expansion capabilities in addition to abundant fixed interfaces. The support of expansion interface cards on models of various types are as follows: -The USG2110-X does not support optional expansion cards. -The USG2130 and USG2130W provide a MIC/DMIC slot, and the USG2160 and USG2160W provide two MIC slots or one DMIC slot. MIC and DMIC interface cards, excluding Wi-Fi interface cards, are optional. FIC and DFIC interface cards are not supported. -The USG2210, USG2220, USG2230, USG2250, and USG2260 provide four MIC slots and two FIC slots. The USG2210E, USG2220E, USG2230E, and USG2250E provide four MIC slots and one FIC slot. MIC/DMIC and FIC/DFIC interface cards are optional. -The USG5120 provides four MIC and 4 FIC slots, and MIC/DMIC and FIC/DFIC interface cards are optional. -The USG5150/5160 provides four MIC and six FIC slots, and MIC/DMIC and FIC/DFIC interface cards are optional. -The USG5520S/5530S supports two FIC interface card expansion slots. These two FIC slots can be combined into one DFIC interface card expansion slot. -The USG5530 supports six FIC interface card expansion slots and two MIC interface card expansion slots. The six FIC interface card expansion slots can be combined into four DFIC interface card expansion slots, and two MIC interface card expansion slots can be combined into one DMIC interface card expansion slot. -The USG5550/5560 supports five FIC interface card expansion slots and two MIC interface card expansion slots. The five FIC interface card expansion slots can be combined into three DFIC interface card expansion slots, and two MIC interface card expansion slots can be combined into one DMIC interface card expansion slot.

Whether the USG6000 supports option 43
The USG6000 supports option 43.

Installing expansion cards on the USG6000
The USG6000 provides the WSIC expansion card that can be installed in the WSIC slot. The slots of the 3U USG6650/6660/6670/6680 are divided into two types: one for Wide Service Interface Cards (WSIC) and the other for Extended Service Interface Cards (XSIC). An XSIC is twice as high as a WSIC. An XSIC slot can also hold a WSIC card, but only in the lower part, and in this case, no other card can be installed in the upper part. Pay attention to the following items in the installation of the USG6000 expansion card: -The expansion card does not support hot swapping. Therefore, power off the USG before installing the expansion card. -Make sure that you have worn an ESD wrist strap and the strap is well grounded before you hold the expansion card. Otherwise, the expansion card may be damaged. The installation procedure is as follows: 1. Ensure that the power module is set to OFF to power off the device. 2. Determine the slot in which an expansion card is to be installed and note the slot number. For details, see the slot numbers on the front panel of the device. 3. Loosen screws on the filler panel of a WSIC slot and remove the filler panel. 4. Open the ejector lever on an expansion card and push the expansion card along the guide rails of the slot until the ejector lever touches the front panel. 5. Push the ejector lever inward until the expansion card is well seated into the slot, and tighten screws on both sides of the expansion card.

Whether the USG6000 supports the CF card
Yes.

Whether expansion interface cards of the firewall are hot swappable
The USG interface card is not hot-swappable. Before removing and inserting an interface card, power off the device first. Otherwise, the hardware may be damaged. You can start the device only after you complete the removal and insertion operations and fasten the screws at the two sides of the board.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top