Whether the USG2000&5000 support optional expansion cards

88

The USG2000/5000 supports multiple types of expansion interface cards, which provide powerful interface expansion capabilities in addition to abundant fixed interfaces. The support of expansion interface cards on models of various types are as follows:
-The USG2110-X does not support optional expansion cards.
-The USG2130 and USG2130W provide a MIC/DMIC slot, and the USG2160 and USG2160W provide two MIC slots or one DMIC slot. MIC and DMIC interface cards, excluding Wi-Fi interface cards, are optional. FIC and DFIC interface cards are not supported.
-The USG2210, USG2220, USG2230, USG2250, and USG2260 provide four MIC slots and two FIC slots. The USG2210E, USG2220E, USG2230E, and USG2250E provide four MIC slots and one FIC slot. MIC/DMIC and FIC/DFIC interface cards are optional.
-The USG5120 provides four MIC and 4 FIC slots, and MIC/DMIC and FIC/DFIC interface cards are optional.
-The USG5150/5160 provides four MIC and six FIC slots, and MIC/DMIC and FIC/DFIC interface cards are optional.
-The USG5520S/5530S supports two FIC interface card expansion slots. These two FIC slots can be combined into one DFIC interface card expansion slot.
-The USG5530 supports six FIC interface card expansion slots and two MIC interface card expansion slots. The six FIC interface card expansion slots can be combined into four DFIC interface card expansion slots, and two MIC interface card expansion slots can be combined into one DMIC interface card expansion slot.
-The USG5550/5560 supports five FIC interface card expansion slots and two MIC interface card expansion slots. The five FIC interface card expansion slots can be combined into three DFIC interface card expansion slots, and two MIC interface card expansion slots can be combined into one DMIC interface card expansion slot.

Other related questions:
Whether the USG6000 supports optional expansion cards
The USG6000 supports multiple types of interface cards to add the number of interfaces. It also supports bypass cards to enhance availability. Purchase them as required. The support of interface cards on models of various types are as follows: -The USG6310/6320/6510-SJJ does not support optional expansion cards. -The USG6306/6308/6330/6350/6360/6370/6380/6390/6507/6530/6620/6630 provides two WSIC slots for the optional 8GE-WSIC-8x1GE RJ45 interface card, 2xG8GE-WSIC-8x1GE RJ45 interface+2x10GE SFP+ interface card, 8GEF-WSIC-8×1GE SFP interface card, and 4GE-BYPASS-WSIC-2×electrical link bypass card. -The USG6650/6660 provides six WSIC slots for the optional 8GE-WSIC-8x1GE RJ45 interface card, 2xG8GE-WSIC-8x1GE RJ45 interface+2x10GE SFP+ interface card, 8GEF-WSIC-8x1GE SFP interface card, and 4GE-BYPASS-WSIC-2xelectrical link bypass card. -The USG6670/6680 provides five WSIC slots for the optional 8GE-WSIC-8x1GE RJ45 interface card, 2xG8GE-WSIC-8x1GE RJ45 interface+2x10GE SFP+ interface card, 8GEF-WSIC-8x1GE SFP interface card, and 4GE-BYPASS-WSIC-2xelectrical link bypass card.

Installing expansion cards on the USG2000&5000
Pay attention to the following items in the installation of the USG2000/5000 expansion card (interface card): -Before installing the interface card, power off the device. -The MIC, DMIC, FIC, and DFIC interface cards of the USG do not support hot swapping. Hot swapping may cause board damage. -The USB-3G interface card of the USG supports hot swapping, but the Subscriber Identity Module (SIM) card and User Service Identity Module (USIM) card do not support hot swapping. Therefore, insert the SIM or USIM card into the 3G data card before installing the USB-3G interface card. -The interface card must be horizontally oriented during installation. -Make sure that you have worn an ESD wrist strap and the strap is well grounded before you hold the interface card. Otherwise, the interface card may be damaged. -After system startup, do not insert and remove the USB interface card repeatedly to prevent problems that the device may fail to identify. -If you need to insert two USB interface cards, use a USB extension cable. Perform as follows to install the MIC/FIC/DMIC/DFIC: 1. Ensure that the power module is set to OFF to power off the device. 2. Loosen screws on the filler panel of the front panel and remove the filler panel. For the DMIC/DFIC interface card, you need also to remove the filler panel in the upper slot. 3. Align the interface card with the guide rails of the slot and tighten the screws. Perform as follows to install the 3G interface card: 1. Install the SIM card on the 3G interface card. 2. Refer to the procedure for installing the MIC/FIC/DMIC/DFIC. Perform as follows to install the USB interface card: 1. Insert the USB interface card into the USB port on the USG. Perform as follows to install the SD data card: 1. Insert the SD data card into the flash card port of the USG.

Whether the USG2000&5000 support capturing packets
You can enable the packet capture function on the USG2000&5000 as follows: 1. Configure the packet capture queue. [USG] packet-capture all-packet queue 0 interface GigabitEthernet 0/0/1 2. Enable the packet capture function. [USG] packet-capture startup manual 3. Save packets in the specified queue as file 1.cap on the device. The default directory is hda1:/. [USG] packet-capture queue 0 to-file 1.cap 4. Use FTP to download file 1.cap from the device, use the packet capture software to open the file, and analyze the captured packets. 5. Clear the packet capture queue and release the memory. After confirming that the host has completed receiving the packets, delete all packets from the queue. reset packet-capture queue 0

Whether the USG2000&5000 support the Telnet function
By default, the USG2000&5000 have the Telnet function enabled, and users can directly use the initial administrator account admin to log in to the device.

Whether the USG2000&5000&6000 support reflective ACLs
The USG6650 and USG5120 do not support reflective ACLs for now.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top