3G models supported by the USG2000&5000

16

The support of 3G on the USG2000/5000 is as follows:
-USG2110-X: This series has models with the built-in 3G function and models without the built-in 3G function. The 110-A-GW is a model with the built-in 3G function. You can use this model by inserting a SIM card into the SIM slot. A model with the built-in 3G function supports dual SIM cards. You can install a USB 3G card on a model without the built-in 3G function to implement the 3G function.
-USG2100, USG2100BSR, USG2100HSR: This series contains only models without the built-in 3G function. You can install a USB 3G card or MIC-3G interface card to implement the 3G function.
-USG2200/5100, USG2200BSR/5100BSR, USG2200HSR/5100HSR: This series contains only models without the built-in 3G function. You can install a USB 3G card or MIC-3G interface card to implement the 3G function.
-USG5500: This series contains only models without the built-in 3G function. You can install a USB 3G card to implement the 3G function.

Other related questions:
Wi-Fi models supported by the USG2000&5000
The support of Wi-Fi on the USG2000/5000 is as follows: -USG2110-X: Only the USG2110-F-W, USG2110-A-W, and USG2110-A-GW support Wi-Fi. -USG2100, USG2100BSR, USG2100HSR: Only the USG2130W, USG2160W, USG2130BSR/HSR-W, and USG2160BSR/HSR-W support Wi-Fi. -USG2200/5100, USG2200BSR/5100BSR, USG2200HSR/5100HSR: Wi-Fi is not supported by default and can be supported after the Wi-Fi (WLAN) interface card is installed. -USG5500: The USG5500 does not support Wi-Fi.

Which 3G models are supported by the AR
The hardware that supports 3G includes the 3G data card, 3G card, and 3G model. The AR equipped with a 3G data card or 3G card provides 3G interfaces. The 3G model is equipped with 3G interfaces. The 3G model refers to the AR with a 3G antenna interface. The 3G interface can be configured on the 3G model with no 3G data card or 3G card inserted. The 3G models in compliance with the WCDMA standard include the AR151G-HSPA+7, AR157G-HSPA+7, and AR207G-HSPA+7. The 3G model in compliance with the CDMA2000 standard includes the AR151G-C.

Displaying the board model on the USG2000&5000&6000
Display the board model as follows: Run the display elabel command. Details are as follows: [Firewall-1]display elabel /$[Board Integration Version] /$BoardIntegrationVersion=3.0 [Main_board] /$[ArchivesInfo Version] /$ArchivesInfoVersion=3.0 [Board Properties] BoardType=USG6650-AC BarCode=210235G7G410EXXXXXXX Item=0235GXXX Description=Assembling Components,USG6650,USG6650-AC,USG6650 AC Host(8GE(RJ45)+8GE (SFP)+2*10GE(SFP+),16G Memory,2 AC Power),with HW General Security Platform Software Manufactured=2014-08-18 VendorName=Huawei IssueNumber=00 CLEICode= BOM= [Slot_1] /$[ArchivesInfo Version] /$ArchivesInfoVersion=3.0 [Board Properties] BoardType=WSIC-2XG8GE //Indicates that the board in slot 1 is WSIC-2XG8GE.// BarCode=02G3C910XXXXXXXXX Item=0302GXXX Description=Firewall,WSIC-2XG8GE,2*10GE Optical Ports+8GE Electric Ports Interface Card,with HW General Security Platform Software,1*1 Manufactured=2014-08-02 VendorName=Huawei IssueNumber=00 CLEICode= BOM= [Slot_2] /$[ArchivesInfo Version] /$ArchivesInfoVersion=3.0 [Board Properties] BoardType=WSIC-8GEF //Indicates that the board in slot 2 is WSIC-2XG8GE.// BarCode=02G3AC10E8XXXXXXX Item=0302GXXX Description=Firewall,WSIC-8GEF,8GE Optical Ports Interface Card,with HW General Security Platform Software,1*1 Manufactured=2014-08-07 VendorName=Huawei IssueNumber=00 CLEICode= BOM=

Whether the USG2000&5000 support capturing packets
You can enable the packet capture function on the USG2000&5000 as follows: 1. Configure the packet capture queue. [USG] packet-capture all-packet queue 0 interface GigabitEthernet 0/0/1 2. Enable the packet capture function. [USG] packet-capture startup manual 3. Save packets in the specified queue as file 1.cap on the device. The default directory is hda1:/. [USG] packet-capture queue 0 to-file 1.cap 4. Use FTP to download file 1.cap from the device, use the packet capture software to open the file, and analyze the captured packets. 5. Clear the packet capture queue and release the memory. After confirming that the host has completed receiving the packets, delete all packets from the queue. reset packet-capture queue 0

Whether the USG2000&5000 support the Telnet function
By default, the USG2000&5000 have the Telnet function enabled, and users can directly use the initial administrator account admin to log in to the device.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top