Method used to query the OID of the USG6000

19

You can query the OID in the MIB of the corresponding product documentation.

Other related questions:
Method used to query the CPU usage of the USG2000, USG5000, or USG6000
You can view the CPU usage of the USG2000, USG5000, or USG6000 as follows: Run the display cpu-usage command. [sysname]display cpu-usage ===== Current CPU usage info ===== Dataplane CPU Average Usage : 0.41%(5 Seconds) Mgmtplane CPU Average Usage : 14%(60 Seconds) Dataplane indicates the CPU usage of the data plane, and Mgmtplane indicates the CPU usage of the management plane. You can run the following commands in the diagnosis view to view the CPU usage of each process: [sysname]diagnose [sysname-diagnose]display cpu-usage

What is the object used for optical module query and its OID
You can find information about optical modules of the switch in the hwOpticalModuleInfoTable. The OID of this table is 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.

What is the OID of the MIB object used for CPU usage query
The OID of the MIB object used for CPU usage query is 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5. You can use this OID and the corresponding index to query CPU usage of a card.

Method used to collect information on the USG6000
The method used to collect information on the USG6000 is as follows: 1. Choose Monitor > Diagnosis Center. 2. Click Information Collection. 3. Click Collect.

Method used to query optical power
In the NE Explorer, select the desired board. Choose Configuration > Optical Power Management from the navigation tree.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top