Whether the AR router allows wireless signals to be enabled periodically

6

The AR router does not allow wireless signals to be enabled periodically.

Other related questions:
How to disable wireless signals of a WLAN device
To save energy or ensure security, run the following commands to disable AP radios or WLAN services: 1. Disable a specified radio. - For AC+Fit AP networking V200R005: [AC6605] wlan [AC6605-wlan-view] ap 0 radio 0 [AC6605-wlan-radio-0/0] undo radio enable For V200R006: [AC6605] wlan [AC6605-wlan-view] ap-id 1 [AC6605-wlan-ap-1] radio 0 [AC6605-wlan-radio-1/0] radio disable Warning: This action may cause service interruption. Continue?[Y/N]y - For Fat APs V200R005: [Huawei] interface wlan-radio 0/0/0 [Huawei-Wlan-Radio0/0/0] undo radio enable For V200R006: [Huawei] interface wlan-radio 0/0/0 [Huawei-Wlan-Radio0/0/0] radio disable Warning: This action may cause service interruption. Continue?[Y/N]y 2. Prevent users from accessing the WLAN in the specified time range. For V200R005: [AC6605] wlan [AC6605-wlan-view] auto-off service ess service-set id 0 start-time 01:00:00 end-time 07:00:00 //Disable the service set with ID 0 from 1:00:00 to 7:00:00. For V200R006: [HUAWEI]wlan [HUAWEI-wlan-view]vap-profile name vap1 [HUAWEI-wlan-vap-prof-vap1]auto-off service start-time 1:00:00 end-time 7:00:00 //Disable a VAP from 1:00:00 to 7:00:00. 3. Disable an AP radio in a scheduled time using the auto-off service radio command (V200R005). For AC+Fit AP networking: [AC6605] wlan [AC6605-wlan-view] auto-off service radio ap-id 0 radio-id 0 start-time 1:00:00 end-time 7:00:00 //Disable radios 0 of AP 0 from 1:00:00 to 7:00:00. For Fat APs: [Huawei] wlan [Huawei-wlan-view] auto-off service radio interface wlan-radio0/0/0 start-time 1:00:00 end-time 7:00:00 //Disable AP interface wlan-radio0/0/0 from 1:00:00 to 7:00:00.

Are spaces allowed in the ESN of an AR router
A space in an ESN of an AR router is an invalid character.

Telnet timeout period configuration method on an AR router
In the user interface view, run the idle-timeout < minutes > [< seconds >] command to set user connection timeout period. By default, the user connection timeout period is five minutes. If the period is set to 0 or the value is too long, a terminal will hang in login state, which poses a security risk. You are advised to run a lock command to lock the current connection.

Is multicast enabled on the AR router by default
By default, the multicast function of the AR router is disabled.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top