Change the SSID on AR routers

12

SSIDs identify different wireless networks. When you search for available wireless networks on your laptop, the displayed wireless network names are SSIDs.
Assume that you change the SSID of service set hw to company.
When the AR router functions as the WLAN AP, the procedure for reconfiguring the SSID is as follows:
When the AR router functions as the WLAN AC, the procedure for reconfiguring the SSID is as follows:
[Router]wlan ac //Enter the WLAN view.
[Router-wlan-view]service-set name hw //Enter the service set view.
[Router-wlan-service-set-hw]undo ssid //Delete the original SSID.
[Router-wlan-service-set-hw]ssid company //Reconfigure the SSID.
[Router-wlan-service-set-hw]quit //Return to the WLAN view.
[Router-wlan-view]commit all //Commit the configuration so that the modified content can be delivered to the Fit AP.
Warning: If the system displays the message indicating that the SSID is in use and cannot be changed, you need to unbind the service set to change the SSID.

Other related questions:
Change the SSID on WLAN devices
Change the SSID on WLAN devices. Command output on the CLI: [HUAWEI]wlan [HUAWEI-wlan-view]service-set name test [HUAWEI-wlan-service-set-test]ssid huawei If the SSID is in use and cannot be modified, unbind SSID invocation and change the SSID again.

When modify the ACL of NAT configuration on AR router, whether the network will be broken?
AR router access control list ACL and interface address are associated, the NAT must be disabled by using command "undo NAT outbound acl-number" and then the ACL configuration can be can modified, it will lead network be broken.

Telnet login and authentication mode configuration method on an AR router
In the user interface view, run the authentication-mode { password | aaa } command to configure a user authentication mode.

How to change local and remote discriminators on the AR router
For static BFD sessions, when the session is created for the first time, a single-hop BFD session is bound to a local interface, while a multi-hop session is not. For dynamic BFD sessions, query the routes to determine whether a BFD session is a single-hop session or a multi-hop session. BFP for Internal Border Gateway Protocol (IBGP) sessions are multi-hop sessions.

How to configure a virtual address of VRRP on an AR router
How to configure a virtual address of VRRP on an AR router? The vrrp vrid virtual-router-id virtual-ip virtual-address command is used to create a VRRP group and specify a virtual IP address for the group. The vrid virtual-router-id command is used to specify a VRRP group number which is an integer in the range from 1 to 255. The virtual-ip virtual-address command is used to specify a virtual IP address (dotted decimal notation) for the VRRP group. [Huawei] interface gigabitethernet 1/0/0 [Huawei-GigabitEthernet1/0/0] vrrp vrid 1 virtual-ip 10.10.10.10 //Create a VRRP group on GE1/0/0. The group number is 1, and the virtual IP address is 10.10.10.10.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top