AP types supported by AR routers

21

You can run the display ap-type all command to check all Fit AP types supported by the AR router by default. By default, AR routers support Huawei Fit APs.
The example is as follows:
AR V200R008 version:display ap-type all
--------------------------------------------------------------------------------
ID Type
--------------------------------------------------------------------------------
17 AP6010SN-GN
19 AP6010DN-AGN
21 AP6310SN-GN
23 AP6510DN-AGN
25 AP6610DN-AGN
27 AP7110SN-GN
28 AP7110DN-AGN
29 AP5010SN-GN
30 AP5010DN-AGN
31 AP3010DN-AGN
33 AP6510DN-AGN-US
34 AP6610DN-AGN-US
35 AP5030DN
36 AP5130DN
37 AP7030DE
38 AP2010DN
39 AP8130DN
40 AP8030DN
42 AP9330DN
43 AP4030DN
44 AP4130DN
45 AP3030DN
46 AP2030DN
47 AP9131DN
48 AP3010DN-V2
--------------------------------------------------------------------------------
Total: 25

AR V200R009 version:display ap-type all
--------------------------------------------------------------------------------
ID Type
--------------------------------------------------------------------------------
17 AP6010SN-GN
19 AP6010DN-AGN
21 AP6310SN-GN
23 AP6510DN-AGN
25 AP6610DN-AGN
27 AP7110SN-GN
28 AP7110DN-AGN
29 AP5010SN-GN
30 AP5010DN-AGN
31 AP3010DN-AGN
33 AP6510DN-AGN-US
34 AP6610DN-AGN-US
35 AP5030DN
36 AP5130DN
37 AP7030DE
38 AP2010DN
39 AP8130DN
40 AP8030DN
42 AP9330DN
43 AP4030DN
44 AP4130DN
45 AP3030DN
46 AP2030DN
47 AP9131DN
49 AP5030DN-S
50 AP3010DN-V2
51 AP4030DN-E
68 AP1010SN
69 AP2050DN
70 AP2050DN-E
71 AP8130DN-W
73 AP2050DN-S
75 AP4050DN
76 AP4051DN
77 AP4151DN
78 AP4050DN-S
79 AP4051DN-S
80 AP8050DN
81 AP8150DN
82 AP8050DN-S
--------------------------------------------------------------------------------
Total: 40

Other related questions:
AP types supported by AR routers
You can run the display ap-type all command to check all Fit AP types supported by the AR router by default. By default, AR routers support Huawei Fit APs. The example is as follows: AR V200R008 version:display ap-type all -------------------------------------------------------------------------------- ID Type -------------------------------------------------------------------------------- 17 AP6010SN-GN 19 AP6010DN-AGN 21 AP6310SN-GN 23 AP6510DN-AGN 25 AP6610DN-AGN 27 AP7110SN-GN 28 AP7110DN-AGN 29 AP5010SN-GN 30 AP5010DN-AGN 31 AP3010DN-AGN 33 AP6510DN-AGN-US 34 AP6610DN-AGN-US 35 AP5030DN 36 AP5130DN 37 AP7030DE 38 AP2010DN 39 AP8130DN 40 AP8030DN 42 AP9330DN 43 AP4030DN 44 AP4130DN 45 AP3030DN 46 AP2030DN 47 AP9131DN 48 AP3010DN-V2 -------------------------------------------------------------------------------- Total: 25 AR V200R009 version:display ap-type all -------------------------------------------------------------------------------- ID Type -------------------------------------------------------------------------------- 17 AP6010SN-GN 19 AP6010DN-AGN 21 AP6310SN-GN 23 AP6510DN-AGN 25 AP6610DN-AGN 27 AP7110SN-GN 28 AP7110DN-AGN 29 AP5010SN-GN 30 AP5010DN-AGN 31 AP3010DN-AGN 33 AP6510DN-AGN-US 34 AP6610DN-AGN-US 35 AP5030DN 36 AP5130DN 37 AP7030DE 38 AP2010DN 39 AP8130DN 40 AP8030DN 42 AP9330DN 43 AP4030DN 44 AP4130DN 45 AP3030DN 46 AP2030DN 47 AP9131DN 49 AP5030DN-S 50 AP3010DN-V2 51 AP4030DN-E 68 AP1010SN 69 AP2050DN 70 AP2050DN-E 71 AP8130DN-W 73 AP2050DN-S 75 AP4050DN 76 AP4051DN 77 AP4151DN 78 AP4050DN-S 79 AP4051DN-S 80 AP8050DN 81 AP8150DN 82 AP8050DN-S -------------------------------------------------------------------------------- Total: 40

Which trunks does the AR router support
The AR router supports the following trunks: - A PRA trunk is connected to a VE1 interface and is usually used to connect two PBXs. - AT0 trunk: An AT0 trunk is connected to an FXO interface. It is an analog circuit trunk and uses the FXO interface of the AR to connect to the PSTN through a common telephone line. If PBX users in an enterprise need to make local calls to external users or to make toll calls, the AT0 trunk is configured. - SIP trunk: SIP trunk includes SIP AT0, SIP PRA and SIP IP trunks. A SIP trunk is established on an IP link and connects a PBX and an IMS. - E1R2 trunk: An E1R2 trunk is connected to a VE1 interface. The E1R2 trunk is usually used to connect two PBXs. If the remote device uses R2 signaling, use the E1R2 trunk to connect to the AR to the remote device. (Note: V200R002C00 and later versions support the E1R2 trunk.) - H323 trunk: An H323 trunk is established on an IP link and connects a PBX and an IMS or PBXs in different areas. (Note: V200R002C01 and later versions support the H323 trunk.) - BRA trunk: A BRA trunk is connected to a BRA interface. It can be used to connect a PBX to the ISDN. (Note: V200R002C02 and later versions support the BRA trunk.)

Which types of interfaces support VRRP on the AR router
Interfaces that support VRRP are as follows: Layer 3 Ethernet interfaces, VLANIF interfaces, Layer 3 Eth-Trunks, Ethernet sub-interfaces, and Eth-Trunk sub-interfaces.

Which types of active interfaces and standby interfaces are supported by the AR router
Types of active interfaces supported by the AR routers: Layer 3 Ethernet interfaces and their sub-interfaces, dialer interfaces, ATM interfaces, ISDN BRI interfaces, asynchronous interfaces, cellular interfaces, PON interfaces, MP-group interfaces, MFR interfaces, FR sub-interfaces, and serial interfaces and their sub-interfaces Types of standby interfaces supported by the AR routers: Layer 3 Ethernet interfaces and their sub-interfaces, dialer interfaces, ATM interfaces, BRI interfaces, asynchronous interfaces, cellular interfaces, MP-group interfaces, MFR interfaces, FR sub-interfaces, and serial interfaces and their sub-interfaces. ISDN BRI interfaces, PON interfaces, and asynchronous interfaces cannot be used as active or standby interfaces on AR120&AR150&AR160&AR200 series.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top