Homepage FAQ Unified Communication and IP Telephony

Is the AT0 dedicated line of the U1910 a dedicated line for incoming and outgoing calls

An AT0 dedicated line is configured only for specific intra-office numbers, and the other numbers cannot use this line for incoming and outgoing calls.

Other related questions:

Marketing materials dedicated to OceanStor V3 products

The marketing documentation of OceanStor V3 products includes success stories, brochures, and technical white papers in brand promotion, customer communication, and bidding fields. For details, visit Marketing Materials.

How to configure a dedicated line for analog users on the OSU board of the U1900?

1. Log in to the web UI, choose User > POTS User, and configure a dedicated line for a port of the corresponding board. 2. You can also configure a dedicated line using commands. For example, you can run the config modify subscriber directdial dn 2800 slot 0 portinboard 1 command to bind user 2800 to port 1 in slot 0 of the OSU board to form a dedicated line.

Can users make outgoing calls through private lines configured for the U1900 if these users are not configured with private lines?

No.

What does the U1900 AT0 dedicated line mean?

The U1900 AT0 dedicated line means that all incoming and outgoing calls of a specific number must be routed through the AT0 port.

How to set the line selection mode for outgoing calls routed through the AT0 trunk to polling on the U1960

Step 1 Log in to the web management system of the U1960. Step 2 On the AT0 configuration page, set the line section mode to polling.