Homepage FAQ Unified Communication and IP Telephony

Can SIP numbers be configured for the ASI or OSU board on the U1900 series unified gateway

135

Only POTS users can be configured for the ASI or OSU board on the U1900. For users under the IAD, IP phone users, or UC soft client users, you need to add SIP numbers for them on the U1900.

Other related questions:

IAD ASI and OSU board support user count

IAD's asi and osu board support for the number of users are as follows： IAD1224 ASI single board supports 32 FXS ports, OSU board supports 12 FXS port and 12 FXO port IAD132 ASI single board supports 16 FXS ports, OSU board supports 8 FXS port and 8 FXO port

How to delete a SIP trunk on the U1900 series unified gateway

You can delete a SIP trunk on the U1900 using the CLI or web management system. 1. Run the config protocol sip disable command in the config mode. 2. Log in to the web management system of the U1900. Choose Trunk > Trunk Configuration > SIP, select a SIP trunk, and click Delete.

Pin assignments of the OSU or ASI board on U1900

For details, see Appendixes > Assembling the RJ11 Connector (for High-Density User Cables) in the Quick Installation Guide .

What is the maximum reach of the analog line of the ASI board on the U1900 series unified gateway

When the user line diameter is 0.4 mm and the phones are not paralleled, the maximum reach of the analog line of the ASI board on the U1910/U1911/U1930/U1960/U1981 is 5 km.

How to query the registration IP address of a SIP number on the U1900 series unified gateway

Two methods are available: - Method 1: Run the show sipue eid xxxx command, where xxxx is the value of eid (usually the user number). If the value of eid is different from the user number, you can run the show subscriber dn xxxx command first to check the eid. - Method 2: Log in to the web management system. Choose User > SIP User and check the IP address of the corresponding number.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Can SIP numbers be configured for the ASI or OSU board on the U1900 series unified gateway

Other related questions:

If you have more questions, you can seek help from following ways: