Configure basic services of the Fat AP on the AR

2

You can configure the Fat AP service to enable users to easily access a wireless network and move around within the coverage of the wireless network. The procedure for configuring the basic function of the Fat AP is as follows:
1. Configure the WLAN mode of the device, basic parameters of the AP, and the addresses allocated to STAs.
2. Configure WLAN service VAPs. After APs go online, you can configure service VAPs for the APs to provide differentiated WLAN services for users. The detailed configuration is as follows:
Create a WMM profile and a radio profile, bind the WMM profile to the radio profile, create a security profile and a traffic profile, configure a WLAN-BSS interface and a WLAN service set, bind the WLAN-BSS interface, security profile, and traffic profile to the WLAN service set, configure a radio, and bind the radio profile and VAP to the radio.

For details, see Example for Configuring Wireless User Access to a WLAN.

Other related questions:
How to maintain the Fat AP service on the AR router
Maintaining the Fat AP mainly includes resetting the Fat AP, initializing the Fat AP, monitoring the AP, and clearing records of STA login failures. For details, see Maintaining WLAN Fat AP.

How to configure WLAN AP through the web platform on the AR
Only the AR routers of which names contain W support the WLAN AP configuration through the web platform, for example, AR201VW-P, AR207VW, AR511GW-LAV2M3, AR503GW-LM7, AR1220W, AR1220EVW, and AR1220VW. The procedure for configuring WLAN AP through the web platform on the AR router is as follows: 1. Enable the DHCP function. 2. Create the VLAN interface. 3. Configure the radio. 4. Create WLAN. For details, see Example for Configuring the WLAN FAT AP Service.

How to configure the Mesh function for a WLAN device
Fat APs do not support the Mesh function. From V200R005C10, the AP9130DN (Fat AP) can function as a vehicle-mounted AP in vehicle-ground communication scenarios. Because vehicle-mounted APs communicate with trackside APs through Mesh links, the Mesh function can be configured for Fat APs since V200R005C10. However, Fat APs can be used only as vehicle-mounted APs in vehicle-ground communication scenarios, but cannot be used for bridging. Currently, the Mesh function is supported only in the AC+Fit AP architecture. However, in this architecture, the AP6310SN-GN, AP2010DN, AP2030DN, AP7030DE, AP9330DN, AD9430DN-24 (including connected RUs), and AD9430DN-12 (including connected RUs) do not support the Mesh function. For more information about Mesh configurations, see: V200R005: Mesh Configuration. V200R006: Mesh Configuration.

How to check whether the AP is a Fit or Fat AP?
Log in to the AC and check: system-view [Huawei] diagnose [Huawei-diagnose] display image //Check AP status.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top