Got it

What services does the U1900 series unified gateway support

80

The U1900 series unified gateway mainly supports two types of services: basic services and supplementary services.
- The basic services include intra-office calls, narrowband inter-office calls, and broadband inter-office calls.
- The supplementary services supplement basic call services, including calling line identification presentation (CLIP), call forwarding, call transfer, call hold, call park, call waiting, three-way calling, conference call, and outgoing call barring (OCB) services. For more details, see the Feature Guide of the U1900 product documentation.

Other related questions:
How do I reset the password for the U1900 series unified gateways
During the device restart, enter R when the system prompts you to press R to restore the default password. At the prompt "[.Conform to restore password.](Y/N):>", enter Y. The following information is displayed: Success to restore default password! Success to save default password! Then, you can use the default password to log in to the gateway.
Which trunks do the U1900 series unified gateways support
All U1900 series unified gateways support SIP/SS7/PRA/R2/QSIG Trunk. U1910/U1911/U1930/U1960/U1981 also support AT0 Trunk, U1980 doesn't support AT0 Trunk. U1911/U1960/U1981 support BRI Trunk, while U910/U1930/U1980 doesn't support BRI.
What protocols are supported by the U1900 unified gateway?
The U1900 series voice gateway supports the following signaling types: SIP, SS7, PRA, QSIG, R2, and AT0.
What functions does the advanced secretary service provide on the U1900 series unified gateway
In the advanced secretary service, a line of the manager's phone is bound to a line of the secretary's phone. The manager and the secretary can receive a call destined for the manager at the same time. The manager can answer the call directly. Alternatively, the secretary answers the call first, determines whether the call needs to be answered by the manager and if so, transfers the call to the manager.
Does the U1900 series unified gateway support loopback test
Method of performing the loopback test for the E1 line on the U1900: - Physically connect a pair of tx and rx ports of the E1 line, and obseve the RFA indicator and LOS indicator on the U1900. If they are both off, the local loopback test is successfully.
If you have more questions, you can seek help from following ways:
To WeiKnow To Live Chat

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.