Homepage FAQ Unified Communication and IP Telephony

Can the U1900 series unified gateway interconnect with a third-party device

The U1900 series unified gateway supports the standard SIP protocol. If a third-party device uses the SIP protocol, you can try interconnecting this device with the U1900. During interconnection testing, run the following command to set the value of software parameter 286 to 0: config softargu type 286 value 0.

Other related questions:

Can the MM of the SMC1.0 interconnect with the third-party NMS?

Currently, the MM of the SMC1.0 is unable to interconnect with the third-party NMS.

How do I reset the password for the U1900 series unified gateways

During the device restart, enter R when the system prompts you to press R to restore the default password. At the prompt "[.Conform to restore password.](Y/N):>", enter Y. The following information is displayed: Success to restore default password! Success to save default password! Then, you can use the default password to log in to the gateway.

How do I change the time of the U1900 series unified gateways

Run the config system date command to change the time in YYYY-MM-DD format.

Configuration for interconnecting the IAD with the U1900 series unified gateway

Configuration for interconnecting the IAD with the U1900: On the IAD, see the IP address of the U1900 as the SIP server. For details, see the IAD product documentation:

How to deploy and upgrade the U1900 series unified gateway

For detailed deployment and upgrade methods, see the upgrade guide of the U1900 series unified gateway:

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Can the U1900 series unified gateway interconnect with a third-party device

Other related questions:

If you have more questions, you can seek help from following ways: