Homepage FAQ Unified Communication and IP Telephony

When an MRS board is configured for the U1980, is it necessary to configure the IP address of the MRS board?

No.

Other related questions:

How many conferences and participants does an MRS board support

An MRS board supports a maximum of 40 conferences and 120 participants.

What is the performance difference between the MRS board and MTU board of the U1900?

For details, see General Information > Product Description > Technical Specifications > Performance and Capacity in the product documentation .

Is there a ratio requirement for MRS and DTU boards on U1980

The DTU board needs to work with the MRS board. U1980 supports a maximum of four DTU-8 boards and four MRS boards.

The status of the U1980 MRS board is abnormal.

1. Check whether the network segment of the MRS board is 168.168.0.10. 2. Run the show inner network command on the main control board to query the network segment of the board. 3. If the network segment of the MRS board is inconsistent with the internal network segment of the main control board, run the config inner network ip XXXX command to change the network segment of the MRS board to 168***, and then restart the U1900.

When an MRS board is added on the U1980, the board status is fault.

1. Delete the board and then add the board again. 2. Remove the board. After reinstalling the board, check the board status. 3. Reload the boot version in boot2 mode.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

When an MRS board is configured for the U1980, is it necessary to configure the IP address of the MRS board?

Other related questions:

If you have more questions, you can seek help from following ways: