Homepage FAQ Unified Communication and IP Telephony

Can the U1980 be used in the UC3.0 solution?

The UC3.0 solution supports the following gateways:

-U1911/1960/1980/1981/USM (serve as the central gateway)

-U1911/1960/1980/1981/AR (serve as the local regeneration gateway)

Other related questions:

Can the U1960 configuration file be used by the U1980?

Different U1900 models cannot interchange their configuration files.

Can the U1980 and SoftCo9500 use the same power module?

The U1980 and SoftCo95200 can use the same power module, which is hot swappable.

Can the U1980 be used in the UC3.0 solution?

The UC3.0 solution supports the following gateways: -U1911/1960/1980/1981/USM (serve as the central gateway) -U1911/1960/1980/1981/AR (serve as the local regeneration gateway)

Can the U1980 use the 120-ohm balanced E1 cable

The U1980 supports 120-ohm balanced E1 cable access. If the cable is a 75-ohm unbalanced one, use the transfer box to convert 75-ohm unbalanced E1 signals into 120-ohm balanced E1 signals so as to meet the requirements for interconnection using the E1 trunk.

Whether the U1980 can be used in UC3.0?

UC3.0 support U1911/1960/1980/1981/USM as center gateway; Support U1911/1960/1980/1981/AR as local regeneration gateway

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Can the U1980 be used in the UC3.0 solution?

Other related questions:

If you have more questions, you can seek help from following ways: