Is the license required for the AC function on the AR

3

V200R008:
AR100, AR120, AR500 (AR502G-L-D-H, AR502GR-L-D-H, AR502EG-L, AR502EGW-L, and AR502CG-L do not support the AC), and AR510 series routers do not require the license for the AC function, and they can connect to a maximum of four APs.
When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600. To connect more APs, load the the license and value-added service package for data services.

AR110-S&AR120-S&AR101-S&AR101W-S&AR150-S&AR160-S&AR200-S&AR1200-S&AR101GW-Lc-S do not require the license for the AC function. The maximum number of APs is as follows:
AR110-S&AR120-S&AR101-S&AR101W-S&AR101GW-Lc-S: 4
AR150-S&AR160-S&AR200-S: 8
AR1200-S: 12

When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR2200-S and AR3200-S. To connect more APs, load the the license and value-added service package for data services.

When the license and value-added service package for data services are not loaded, a maximum of two APs can connect to the
NE16EX. To connect more APs, load the the license and value-added service package for data services.


V200R007:
AR120, AR500 (AR502G-L-D-H and AR502GR-L-D-H do not support the AC), and AR510 series routers do not require the license for the AC function, and they can connect to a maximum of four APs.

When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600. To connect more APs, load the the license and value-added service package for data services.

AR110-S&AR120-S&AR101-S&AR101W-S&AR150-S&AR160-S&AR200-S&AR1200-S&AR101GW-Lc-S do not require the license for the AC function. The maximum number of APs is as follows:
AR110-S&AR120-S&AR101-S&AR101W-S&AR101GW-Lc-S: 4
AR150-S&AR160-S&AR200-S: 8
AR1200-S: 12

When the license and value-added service package for data services are not loaded, a maximum of four APs can connect to the AR2200-S and AR3200-S. To connect more APs, load the the license and value-added service package for data services.

When the license and value-added service package for data services are not loaded, a maximum of two APs can connect to the
NE16EX. To connect more APs, load the the license and value-added service package for data services.

For the license for the WLAN AC in V200R006 and earlier versions, see Product Documentation.

Other related questions:
URL functions requiring a license
The license requirements for URL functions are as follows: -Exception IP address: No -Blacklist and whitelist: No -URL user-defined category: No -URL predefined category: Yes

Functions available only after licenses are loaded to S series switch
S series fixed switches: In V200R007 and earlier versions, fixed switches, except S5720HI, do not support license files. All functions are available without the need of license. The S5720HI can increase the number of IPv4 FIB entries or connected APs by loading different licenses. In V200R007, the SVF function is provided by S5720HI after a license is loaded. Other basic functions do not need licenses. S series modular switches: The MPLS, NQA, IPv6, traffic distribution, and SVF features of the S7700&S9700&S12700 are controlled by licenses. Without the corresponding licenses loaded, the commands can be executed, but the functions do not take effect. After the corresponding licenses are loaded, X1E boards can support more FIB entries, PPPoE users, or APs. The MPLS, NQA, IPv6, traffic distribution, and service port cluster features of the S9300 are controlled by licenses. Without the corresponding licenses loaded, the commands can be executed, but the functions do not take effect. In addition, by using different licenses, X1E boards can extend FIB entries. Note: On an S9300, before a service port cluster is established, load licenses to both active/standby chassis.

Is the license required for DSVPN on the AR
The license for DSVPN is required on other models excluding AR120 AR500 and AR510 series. To use the DSVPN function, apply for and purchase the following license from the Huawei local office: AR150&160&200 series: AR150&160&200 value-added service package for security services and AR150&160&200 Dynamic Smart VPN (DSVPN) function AR1200 series: AR1200 value-added service package for security services and AR1200 DSVPN function AR2200 series: AR2200 value-added service package for security services and AR2200 DSVPN function AR3200 series: AR3200 value-added service package for security services and AR3200 DSVPN function AR3600 series: AR3600 value-added service package for security services and AR3600 DSVPN function

Do the FCF and FCoE functions of CE series switches require licenses
The FCF function of CE12800 switches is controlled by a license. By default, the FCF function is disabled on a new CE12800 switch. To use the FCF function, apply for and purchase a license from the device supplier. The FCF and NPort Virtualization (NPV) functions of CE8800, CE7800, and CE6800 switches are controlled by licenses. By default, the FCF and NPV functions are disabled on a new CE8800, CE7800, or CE6800 switch. To use the FCF and NPV functions, apply for and purchase licenses from the device supplier. There are two types of licenses for the FCF function: - CE-LIC-FCF-ALL The FCF function can be configured on all interfaces. - CE-LIC-FCF-PORT The FCF function can be configured on a maximum of 48 interfaces of the same card or different cards of a CE12800 switch. The FCF function can be configured on a maximum of 16 interfaces of a CE8800, CE7800, or CE6800 switch. Multiple CE-LIC-FCF-PORT licenses can be loaded on a switch for capacity expansion. The Fibre Channel Initialization Protocol Snooping Bridge (FSB) function is a basic function of a switch and can be used without a license.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top