Got it

When the duration of the instant conference scheduled on the U1960 reaches one hour, will the conference be released automatically?

50

The default duration of an instant conference scheduled on the U1900 is one hour. A notification will be displayed when the conference duration is close to one hour, but the system does not end the conference automatically.

Other related questions:
How do I view the scheduled conference start time on the SMC2.0?
View the scheduled conference start time on the SMC2.0 as follows: Select a scheduled conference in the conference list, click Edit Scheduled Conference, and view information such as the conference start time in the conference information window.
Changing the default number of participants for an instant conference
For an instant conference held using the web self-service system of a U1900 series unified gateway model, a maximum of three participants are supported by default. When the number exceeds three, the system displays a message indicating that no more users can join the conference. The default number of participants allowed can be set based on actual conditions, but it is recommended that the value be set to an appropriate one; otherwise, resources are wasted. For example, if the license supports a maximum of 60 users and the value here is 10, a maximum of 6 (60/10) instant conferences can be held concurrently. The command is as follows: config instantconf regnum x If the show instantconf regnum command output displays The regnum of instant conference is x.the setting is successful. When an eSpace soft terminal or IP phone is used to hold an instant conference, the system dynamically adds participant resources according to the number of participants, free of the value limit set here.
Can the ID of a scheduled conference on the U1980 be customized?
When a conference is scheduled on the U1900 voice gateway, the length of the conference ID can only be set to two or eight digits. The configuration details are as follows: Log in to the CLI, enter the config mode, and run the config confid length length command. (The value of the length parameter is 2 or 8. The default value is 8.) Usage guide The length of the conference ID entered when a user joins a conference must be the same as that set in the system. Example Run the config confid length two command to set the length of the conference ID to two digits. Note: The length of the conference ID can only be changed to two or eight digits.
When the U1960 is configured with one AT0 trunk, can multiple outgoing calls be made in a conference?
No, because only one AT0 trunk line is available. When the U1960 is configured with multiple AT0 trunks or the E1 digital trunk, multiple outgoing calls can be made in the conference to invite multiple participants.
If you have more questions, you can seek help from following ways:
To WeiKnow To Live Chat

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.