Homepage FAQ Unified Communication and IP Telephony

When the U1960 is configured with one AT0 trunk, can multiple outgoing calls be made in a conference?

No, because only one AT0 trunk line is available.

When the U1960 is configured with multiple AT0 trunks or the E1 digital trunk, multiple outgoing calls can be made in the conference to invite multiple participants.

Other related questions:

How to configure the U1900 so that incoming calls made through the AT0 trunk can be transferred to a fixed extension number?

Log in to the web UI of the U1900 and choose Trunk > Trunk Configuration > AT0. Set the default called number 1 of the AT0 trunk to the corresponding extension number.

How to configure the automatic switchboard service when the U1960 uses the AT0 trunk?

1. Set Service type to Virtual user and Call property to Automatic switchboard. Configure Trunk access yes or no based on the actual requirements. 2. When configuring the AT0 trunk, the default called number is set to the access code of the automatic switchboard configured in the preceding step.

When the U1960 uses the AT0 trunk to make outgoing calls, can the calling numbers be displayed as a fixed number?

When the U1960 uses the AT0 trunk to make outgoing calls, the calling number can be displayed as the trunk dedicated line number. Other numbers cannot be used as the calling numbers displayed to the called parties.

When the IP phone under the U1911 initiates an outgoing conference call through the AT0 trunk, which AT0 trunk is used to route the call?

In the scenario where the U1900 uses the AT0 trunk for networking, for a local conference initiated on the IP phone, the corresponding dedicated line is used; for an instant conference, the line is selected in polling mode. If all AT0 lines are dedicated lines, only the outgoing call for initiating a local conference can be routed through these lines.

How to set the line selection mode for outgoing calls routed through the AT0 trunk to polling on the U1960

Step 1 Log in to the web management system of the U1960. Step 2 On the AT0 configuration page, set the line section mode to polling.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

When the U1960 is configured with one AT0 trunk, can multiple outgoing calls be made in a conference?

Other related questions:

If you have more questions, you can seek help from following ways: