As described on brochures, AR1220 can support 100 users if the traffic of each user is not large. However, the performance of AR1220 may decrease if the traffic of each user is large.
Recommended user numbers of different devices are described as follows:
AR3260: more than 350 users
AR2220: 50 to 350 users
AR1200: fewer than 50 users
AR150 and AR200: fewer than 30 users
An AR router supports user levels 0-15. The value 0 indicates the visit level, value 1 indicates the user level, value 2 indicates the configuration level, values 3 to 15 indicate the management level.
For the number of APs supported by the AR used as an AC, contact Huawei technical support personnel. Starting from V200R006, you can run the max-user-number command to configure the maximum number of access users in a service set. By default, the maximum number of access users in a service set is 32.
The U1910/U1930 supports a maximum of 4 conferences and 12 participants. A conference supports a maximum of 12 participants.
The U1960 supports a maximum of 120 conferences and 360 participants. A conference supports a maximum of 60 participants. An MTU board supports a maximum of 20 conferences and 60 participants.
The U1980 supports a maximum of 320 conferences and 960 participants (with 8 MRS boards equipped). A conference supports a maximum of 120 participants. An MRS board supports a maximum of 40 conferences and 120 participants.
If you have more questions, you can seek help from following ways:
