How to modify the customized rights of a prefix on the U1930

To configure custom call rights on the U1900, perform the following steps: Step 1 Configure custom call right 1 for a prefix. config add prefix dn 90 callcategory basic callattribute inter cusattribute cus1 cldpredeal no Step 2 Select custom call right 1 for users who can call this prefix. Specifically, on the web management system of the U1900, choose User > SIP User > Service Configuration > Outgoing Call Right and select this custom call right. The custom call rights are associated with a user's call right. For example, if custom call right 1 is configured for a prefix but is not selected for a user, the user cannot call this prefix.

New services in default rights can be modified, but the outgoing call rights cannot.

Run the show subscriber filter outgoingrights cus1 command.

The administrator can log in to the U1981 web management system and modify the outgoing call rights for a user on the user management page. When the working time segment is not configured, Default users have intra-office and local call rights; common users have intra-office, local, and national toll call rights; advanced users have intra-office, local, national toll, and international toll call rights; privileged users can make any types of calls.

You can run the config modify trunkgroup command on the U1980 to modify the trunk rights. For example, to modify the outgoing call rights of trunk 1 to local, run the config modify trunkgroup no 1 outgoingright local command. In the preceding command, the trunk number "1", rights name "outgoingright", and rights type "local" can be modified based on site requirements. For details, see the U1900 command reference.