How to configure custom call rights

To disable the outgoing call rights for a user on the U1900, perform the following steps: 1. Log in to the web management system of the U1900. 2. Choose User >SIP User(POTS User)>Service Configuration > Outgoing Call Right and deselect the corresponding rights for the corresponding user.

To configure custom call rights on the U1900, perform the following steps: Step 1 Configure custom call right 1 for a prefix. config add prefix dn 90 callcategory basic callattribute inter cusattribute cus1 cldpredeal no Step 2 Select custom call right 1 for users who can call this prefix. Specifically, on the web management system of the U1900, choose User > SIP User > Service Configuration > Outgoing Call Right and select this custom call right. The custom call rights are associated with a user's call right. For example, if custom call right 1 is configured for a prefix but is not selected for a user, the user cannot call this prefix.

Log in to the device using the LMT or SSH and run the config prefix dn command. For example, to modify the customized rights of prefix 17 to cus1, run the [%eSpace U1980(config)]#Config modify prefix dn 17 cusattribute cus1 command.

Run the show subscriber filter outgoingrights cus1 command.

The administrator can log in to the U1981 web management system and modify the outgoing call rights for a user on the user management page. When the working time segment is not configured, Default users have intra-office and local call rights; common users have intra-office, local, and national toll call rights; advanced users have intra-office, local, national toll, and international toll call rights; privileged users can make any types of calls.