How to modify the length of the conference ID for scheduled conferences on the U1900 series unified gateway

The maximum duration is 8 hours.

When a conference is scheduled on the U1900 voice gateway, the length of the conference ID can only be set to two or eight digits. The configuration details are as follows: Log in to the CLI, enter the config mode, and run the config confid length length command. (The value of the length parameter is 2 or 8. The default value is 8.) Usage guide The length of the conference ID entered when a user joins a conference must be the same as that set in the system. Example Run the config confid length two command to set the length of the conference ID to two digits. Note: The length of the conference ID can only be changed to two or eight digits.

You can schedule a conference call on the web self-service portal or by dialing the conference access code. For detailed operations, see Configuration > Feature Guide > Voice Meeting > Scheduled Meeting in the eSpace UC product Documentation .

1. For the U1900 of the V100R001 version, the configuration is as follows: (1) Run the config add prefix command to configure a conference access code. (2) Load the conference script CLI. The file is stored in Script\english. Copy all commands in the file and paste them in the config mode of the U1900. The system will automatically execute these commands. (3) You can use the LMT or U1900 web self-service system to schedule and access conferences. (In V100R001C01, only the U1960 has a web self-service system. In V100R001C20, all U1900 models have a web self-service system.) 2. For the U1900 of the V200R003 version, the configuration is as follows: (1) Run the config add prefix command to configure a conference access code. You can use the web management system to configure a conference access code. (2) You can schedule a conference on the web self-service system beforehand. When the start time arrives, participants can join the conference in different modes. You can also start an instant conference on the terminal or conference management page. For more information, obtain the U1900 product documentation of the corresponding version from .

Method of configuring voice conference function of the U1900 series unified gateway: For details, see Configuration > Feature Guide > Voice Meeting in the product documentation .