The DP300 can be added to a conference after answering the conference invitation call. The call can be answered automatically (default) or manually.
?If you enable auto answer and the DP300 is not in a conference, the DP300 answers the call automatically.
?If the answer mode is set to manual, the DP300 displays a notification when receiving a call from a remote site. You can use the touchscreen to answer or reject the call.
If the local site, for which the built-in MCU has been enabled, receives calls from several remote sites simultaneously, choose to answer one, several, or all calls from the call list.
To set the sleep mode for a TE series endpoint and wakes up the endpoint from the sleep mode, perform the following operations:
On the web interface of the endpoint, choose System Settings > General > Power management.
Enter sleep mode: period after which an endpoint enters the sleep mode (when the sleep conditions are met) if no operation is performed.
If this parameter is set to Never, the endpoint will never go to sleep automatically. Default value: 10 minutes
The endpoint wakes up from sleep mode once any operation is performed on it. For example, the endpoint wakes up for an incoming call, an operation on the remote control, or access to the endpoint web interface. To directly place the endpoint in sleep mode, press the power off key on the remote control and select the sleep option.
