How to cancel the U1900 series gateway conference ring tone?

System software parameter 270 is used to control whether to play the call forwarding announcement on the U1900 series unified gateway. To disable the call forwarding announcement, perform the following steps: 1. Check the value of software parameter 270. (Value 0 indicates that the call forwarding announcement is disabled, and value 1 indicates that the call forwarding announcement is enabled.) If Current Value is empty, the default value 1 is used. [%eSpace U1981(config)]#show softargu configinfor id 270 ID : 270 Type : service Current Value: -- Desc : Whether to hear the prompt tone about the transfer reason [range: 0(NO), 1(YES)][default:1] 2. Change the value of software parameter 270 as required. config softargu type 270 value 0 //Call forwarding announcement is disabled. the value is-0 , when perform the forward service will be not any prompt config softargu type 270 value 1 //Call forwarding announcement is enabled. the value is 1 , when perform the forward service will be get tone to prompt- the call is redirecting- 3. Save the modification.

To modify the conference ID length for scheduled conferences on the U1900, run the config confid length length command in config mode. The length parameter has two options: two and eight. The default value is eight. Usage guideline The length of the conference ID entered when a user joins a conference must be the same as that set in the system. Example Set the length of a conference ID to two digits: config confid length two

Set software parameter 439 to 1. Then, the announcement "Speak your name" will not be played. Set software parameter 339 to 0. Then, the announcement "Welcome to join the conference" will not be played.

1. For the U1900 of the V100R001 version, the configuration is as follows: (1) Run the config add prefix command to configure a conference access code. (2) Load the conference script CLI. The file is stored in Script\english. Copy all commands in the file and paste them in the config mode of the U1900. The system will automatically execute these commands. (3) You can use the LMT or U1900 web self-service system to schedule and access conferences. (In V100R001C01, only the U1960 has a web self-service system. In V100R001C20, all U1900 models have a web self-service system.) 2. For the U1900 of the V200R003 version, the configuration is as follows: (1) Run the config add prefix command to configure a conference access code. You can use the web management system to configure a conference access code. (2) You can schedule a conference on the web self-service system beforehand. When the start time arrives, participants can join the conference in different modes. You can also start an instant conference on the terminal or conference management page. For more information, obtain the U1900 product documentation of the corresponding version from .

Method of configuring voice conference function of the U1900 series unified gateway: For details, see Configuration > Feature Guide > Voice Meeting in the product documentation .