How to configure conference services on U1900?

If the U1900 of V200R003 or later is used, see Configuration > Feature Guide > Voice Meeting in the U1900 product documentation .

Add a prefix as the conference access code on the U1900. Set the Service type parameter to Virtual user and Call property to phone meeting.

1.The way to configure U1900 V100R001 voice conference service is as follows: A, Config conference access code--config add prefix B, load the script command line. Command line file path under software version : "Script\chinese\ to the conference script command line.Txt". The system will automatically execute the configuration script when copying and pasting all commands in the script command line into the U19 unified gateway configuration mode. C,Can maintain and use the reservation terminal through the local LMT, or use a U19 web self-service system (Only U1960 under V100R001C01 and all versions under V100R001C20 have a web self-service system.) Use: Individual Dialing-In、Host Convening、System Convening and Instant Conference. 2.In U1900 series gateway of V200R003 version , voice conference service is configured as follows: A, config add prefix;/ / can also be added through U19 gateway web management page. B, The moderator joins a conference as prompted by the IVR and invites participants to the conference using the phone or web self-service system. They can also initiate an instant conference without scheduling the conference in advance with web self-service system Description: the detailed operation steps, please access following link to obtain the corresponding version product documentation:

1. For the U1900 of the V100R001 version, the configuration is as follows: (1) Run the config add prefix command to configure a conference access code. (2) Load the conference script CLI. The file is stored in Script\english. Copy all commands in the file and paste them in the config mode of the U1900. The system will automatically execute these commands. (3) You can use the LMT or U1900 web self-service system to schedule and access conferences. (In V100R001C01, only the U1960 has a web self-service system. In V100R001C20, all U1900 models have a web self-service system.) 2. For the U1900 of the V200R003 version, the configuration is as follows: (1) Run the config add prefix command to configure a conference access code. You can use the web management system to configure a conference access code. (2) You can schedule a conference on the web self-service system beforehand. When the start time arrives, participants can join the conference in different modes. You can also start an instant conference on the terminal or conference management page. For more information, obtain the U1900 product documentation of the corresponding version from .