How to configure the alarm clock service on the U1900?
78The administrator can configure the alarm clock service on the web UI. Users can register or cancel the alarm clock service through the web self-service system or phones.
1. Log in to the web management system of the U1900 series unified gateway as the administrator.
2. ChooseUser > SIP User or User > POTS User. On the displayed page, select the number whose service rights need to be configured and click Service Configuration.
In the Simple Service area, select Clock.
Note: You must select Clock before configuring the Clock service in the Complex service area or in the web self-service system.
4. In the Complex service area, click Configure next to Clock.
Enter the alarm time.
2. Register the service through phones
A user dials *55*HHMM# and hears an announcement indicating that the service is registered successfully.
Note:
The variable HH indicates the hour with two numerals. The valid value range is 00-23.
The variable MM indicates the minute with two numerals. The valid value range is 00-59.
A user dials #55# and hears an announcement indicating that the service is canceled successfully.
3. Register the service through the web self-service system
Log in to the web self-service system of the U1900 as a common user.
On the Self-Service tab page, click the Service tab.
Click Clock.
On the Clock tab page, set the alarm time and click OK.
Note:
You can click Disable Service to cancel the alarm clock service.
