Homepage FAQ Unified Communication and IP Telephony

How does the U1900 interwork with a third-party network management system (NMS)?

The U1900 series unified gateway reports alarms to the network management system using any of the following protocols:
SSH
Telnet
SNMP V3
For details, see Reference > FAQ > Gateway Login FAQs > How Does the U1900 Series Unified Gateways Report Alarms to eSight in the eSpace U1900 Series Unified Gateway Product Documentation.

Other related questions:

Can the MM of the SMC1.0 interconnect with the third-party NMS?

Currently, the MM of the SMC1.0 is unable to interconnect with the third-party NMS.

How does the U1900 interwork with a third-party phone?

1. Run the config softargu type 286 value 0 command to set software parameter 286 to 0 on the U1900 so that a third-party phone can register with the U1900. 2. Set the SIP server address to the IP address of the U1900 unified gateway on the third-party phone according to the authentication mode of the third-party phone.

When the U1960 interworks with network management software, how to modify the SIP user name?

Run the config modifysubscriber dn xxxx username yyyy command, where xxxx indicates the user number whose name is to be modified and yyyy indicates the new name.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

How does the U1900 interwork with a third-party network management system (NMS)?

Other related questions:

If you have more questions, you can seek help from following ways: