Can I bind multiple dial-up links to increase the bandwidth

15

Yes, you can bind multiple dial-up links to increase the bandwidth.

Other related questions:
Configure Eth-Trunk on the S1728GWR-4P switch
Configure an Eth-Trunk on an S1728GWR-4P switch as follows: 1. Add a trunk. a. Choose Interface > Trunk > Static. b. Select Add from the Action drop-down list box and configure parameters to add a trunk. c. Click Apply. 2. Set trunk properties. a. Choose Interface > Trunk > Static and select Config from the Action drop-down list box. b. Modify the interface configuration as required. c. Click Apply. 3. Add trunk members. a. Choose Interface > Trunk > Static and select Add member from the Action drop-down list box. b. Select a trunk ID and specify a port number range of which the interfaces are added to the trunk. c. Click Apply.

Configure Eth-Trunk on the S1700-FR or S1700-GFR switch
Configure an Eth-Trunk on an S1700-FR or S1700-GFR switch as follows: 1. Add a trunk. a. Choose Interface Management > Eth-Trunk. b. Click New to create a trunk group. c. On the page displayed, configure trunk parameters and add member interfaces to the trunk group. d. Click Apply. 2. Set trunk properties. a. Choose Interface Management > Eth-Trunk. b. Click the editing icon on the right of the trunk to be configured. c. Configure trunk parameters. d. Click Apply.

Can bandwidths of multiple PPPoE dialup line be summed up on the AR router
The bandwidth of multiple lines cannot overlap.

Whether the AR router PPPoE dial-up lines bandwidth can be superimposed?
AR router PPPoE dial-up line bandwidth can not be superimposed, can not be achieved result like: 10M+10M=20M.

Can an AR router as a called party disconnect an established dial-up link
Yes. You can run the dialer disconnect interface interface-type interface-number command to disconnect a dial-up link temporarily.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top