Can an AR series router used as a called party tear down a dial-up link that has been set up

2

Yes. To temporarily tear down a dial-up link, run the dialer disconnect [ interface interface-type interface-number ] command.

Other related questions:
Can an AR router as a called party disconnect an established dial-up link
Yes. You can run the dialer disconnect interface interface-type interface-number command to disconnect a dial-up link temporarily.

Whether the AR router PPPoE dial-up lines bandwidth can be superimposed?
AR router PPPoE dial-up line bandwidth can not be superimposed, can not be achieved result like: 10M+10M=20M.

Can an outbound interface be specified for dial-up in the resource-shared DCC dial-up method
Yes. You can run the dialer route ip next-hop-address user hostname | broadcast * dial-string autodial | interface interface-type interface-number * command to specify an outbound interface for dial-up.

Can I bind multiple dial-up links to increase the bandwidth
Yes, you can bind multiple dial-up links to increase the bandwidth.

Can bandwidths of multiple PPPoE dialup line be summed up on the AR router
The bandwidth of multiple lines cannot overlap.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top