How to configure the speed dial function on the LCD screen of the eSpace 7910?

Order for calling the three screens of the TP3106/TP3206: left, middle, and right.

When the two-stage dialing plate exists on interface, it supports two-stage dialing.

1.pound # when finish dial： 2.cofigiuration a digitmap for IAD： on the IAD，in the global mode,and executive command：display sip digitmap if user on IAD dial number is 0159xxxxxxxx，you can cofigiuration a digitmap 0159xxxxxxxx，achieve begin at 0159 12 phone number 。 3.open bit by bit function： We can not config the bit by bit function on IAD，but we can turned on the feature on a soft - switching voice gateway device, which can be implemented with the following configuration: Unified gateway configuration in U1900, open the bit by bit reporting function： #config modify digitmap protocol sip sendmapswitch on #config softargu type 282 value 1 // sip support IAD dial needn't pound # Default "0" is off #config add digitmap protocol sip value x Unified gateway configuration in U1900, turn off the bit by bit reporting function： #config modify digitmap protocol sip sendmapswitch off #config softargu type 282 value 0 // sip support IAD dial needn't pound # Default "0" is off #config delete digitmap protocol sip value x If the field IAD equipment is less, it is recommended to configure the SIP digitmap on the IAD device. Specific configuration please refer to the corresponding model of the product documentation.

The default user name and password for the administrator is admin and admin123 respectively.