Got it

How to disable the do not disturb (DND) function on the eSpace 7910?

608

Log in to the IP phone's web management page, choose Advanced > Service Rights Management, disable the DND right, and then save the configuration.

Other related questions:
How Do I enable the Do Not Disturb function on the DP300?
If you do not want to be disturbed by incoming calls, you can enable the Do Not Disturb function. After that, no incoming call will be received at your site, and remote sites will be notified that your site is busy when calling you. 1. Tap the Do Not Disturb icon on the main menu. 2. Enable or disable the DND function. After the DND function is enabled, its status icon is displayed in the upper right corner of the touchscreen.
How do I disable the digital zoom function of a camera?
Method of disabling the digital zoom function of a camera: A camera uses digital zoom after maximum optical zoom, and the image quality decreases. You can disable digital zoom to improve the image quality. The procedure is as follows: Step 1 On the PTZ of the VPC600, press SELECT to select IR, press Mode to select LOCAL, and press SELECT. Step 2 Press the delete button twice consecutively on the remote control to access the OSD screen of the C02 camera. Step 3 Press the down arrow button on the remote control to select DIGITAL ZOOM and press OK. Then press OK and select 1X. Step 4 Press the left arrow button to select CUSTOM PRESET and press OK. Then press OK and select ON.
How do I enable the Bluetooth function for eSpace 7900 series
On the home screen, choose Apps > System > Bluetooth. The Bluetooth screen is displayed. Press Enable. After you enable Bluetooth, you can perform the following steps to pair a Bluetooth device with the phone: On the home screen, choose Apps > System > Bluetooth. The Bluetooth screen is displayed. Press Search. NOTE: Before the phone searches for Bluetooth devices, ensure that Bluetooth is enabled for the device to be paired. Select the Bluetooth device to pair and press Connect. NOTE: The default password for pairing a Bluetooth device is 0000 on the IP phone. If the password of your Bluetooth device to pair is not 0000, enter the actual password in the Bluetooth Match Request dialog box that is displayed on the IP phone, and press Match for a re-connection. When the pairing succeeds, the paired Bluetooth device becomes connected to the phone.
How do I disable the key tone on my IP phone
On the web page, choose Preferences > Key Tone. Select Disable. Click Save.
In softco 9500, how to register Do-not-Disturb(DND) service?
Procedures to register DND service in softco 9500 are shown as follows: Do-not-Disturb Service If user want to block all incoming calls, he can register the do-not-disturb service (DDS). In this case, when others call you, they hear the DDS prompt tone or busy tone. The user's phone registers the DND service. When other users dial this phone number, the users hear the DND prompt tone, and no calls are got through to the user. But the DND service does not affect outgoing calls, and the user can call other users normally. Service Configuration By default, users already have this service. If you do not have the right, the administrator must add the right on the SoftCo. Granting the Service You can add the DDS service according to the following command: config modify subscriber dn [subpbxno <0-251>] operatenewservice add newservicerights dds Removing the Service You can delete the DDS service according to the following command: config modify subscriber dn [subpbxno <0-251>] operatenewservice del newservicerights dds Service Application This section describes how to use the service of DDS. Registering the Service 1. A picks up the phone. 2.A dials *56#. A hears the prompt tone that the DDS service is registered successfully. Note: Assume that A is a user with the right of the DDS service. This service can be registered by running the "config activeservice dn DN type dds" command. Thus user does not have to register it on the phone. Using the Service If you register the DDS service, when others call you, they hear the DDS prompt tone or busy tone. When you pick up the phone, you hear a special dialing tone and the outgoing call is not restricted. Canceling the Service The DDS service can be canceled in either of the following ways: A picks up the phone, and then dials #56#. Run the "config deactiveservice dn DN type dds command. Precautions If the phone of A is a POTS phone connected to the SoftCo or a user box, after registering the DDS service, A will hear the special dialing tone consisting of beeps when A picks up the phone. When the DND service is registered, the call waiting service cannot be used. The DND service cannot be registered together with the call back on busy service, absent user service, alarm clock service, CTVMU service, CTVMNR service, or CTVMB service.
If you have more questions, you can seek help from following ways:
To WeiKnow To Live Chat

Login and enjoy all the member benefits

Login

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.