Homepage FAQ Unified Communication and IP Telephony

Can I shorten the IP phone re-registration interval

To modify the re-registration interval, perform the following steps:
Step 1 Access the phone web page as an administrator.
Step 2 Choose Advanced > SIP Signaling. On the page that is displayed, set the re-registration interval.

Other related questions:

How do I view the SIP re-registration interval of the MCU?

To view the SIP re-registration interval of the MCU, perform the following operations: 1. Log in to the MCU web interface. 2. Choose Settings > H.323 and SIP. The H.323 and SIP page is displayed. 3. Click the SIP tab. View the value of Re-registration interval (5�C60s) under Enable SIP.

Can I shorten the IP phone re-registration interval

To modify the re-registration interval, perform the following steps: Step 1 Access the phone web page as an administrator. Step 2 Choose Advanced > SIP Signaling. On the page that is displayed, set the re-registration interval.

Can I query the IP phone's IP address on the U1960?

The IP address of the IP phone cannot be queried on the U1900. You can run the show subscriber dn xxxx command to query the EID corresponding to the user number. Then run the show sipue eid xxxx command to query the registered IP address of the number.

Phone registration on U1981

For details, see Configuration > Configuration Guide > Allocating User Numbers in the U1900 product documentation.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Can I shorten the IP phone re-registration interval

Other related questions:

If you have more questions, you can seek help from following ways: