How do I modify the automatic dial time on my IP phone

If manually configured, the phone time will be restored to factory settings after the IP phone is restarted. If the phone time is obtained using NTP, it will not be restored to factory settings after the IP phone is restarted. To configure the NTP service, perform the following steps: 1. Log in to the phone's web page (http://IP address of the IP phone). The default user name and password are admin and admin123. 2. On the web page, choose System > Date and Time > Time server address 1 and set the address of the NTP server.

Access the phone web page. Choose Call Settings > Auto Answer. Select Enable. In Delay time, enter the delay time. Click Save.

eSpace 7900 series: On the home screen, choose Apps > System > Power Saving > Auto Sleep. Press Enable. Select a value and press Select. eSpace 8850: On the home screen, choose settings > Screen Settings > Sleep. Select Sleep after. Tap Save.

On the home screen, choose Apps > Preferences > Audio Source. The Audio Source screen is displayed. Select Speaker or Headset(RJ-9). NOTE: If your IP phone is not connected to a Bluetooth headset or USB headset, you can only select either Speaker or Headset (RJ-9) as the audio source. The RJ-9 headset PLANTRONICS HW111N-U10P is recommended. Press Select.

On the home screen, choose Apps > Preferences > Call Settings > Auto Dial. Press Enable. The Dial After field is displayed. Enter a value. Press Done.