Number of L2TP users supported by the AR

27

The number of L2TP users supported by the device is as follows:
- AR120&AR150&AR160&AR200&AR500: 16
- AR510: 2
- AR1200 series, AR2201-48FE, AR2202-48FE, and AR2204: 128
- AR2220, AR2220L, AR2220E, and AR2240 and AR3200 equipped with the SRU40 or SRU60: 512
- AR2240 and AR3200 equipped with the SRU80 or SRU100: 1024
- AR2240 and AR3200 equipped with the SRU200: 1024
- AR3600 equipped with the SRUX5: 1024
- AR120-S&AR150-S&AR160-S&AR200-S: 16
- AR1200-S series, AR2201-48FE-S, and AR2204-S: 128
- AR2220-S and AR2240-S: 512
- AR3200-S equipped with the SRU40: 512
- NE16EX-6 and NE16EX-8 equipped with the MSP20: 1024
- NE16EX-6 and NE16EX-8 equipped with the MSP40: 1024
- AR530: 16

Other related questions:
Number of L2TP tunnels on the AR
The number of L2TP tunnels is as follows: - AR120&AR150&AR160&AR200&AR500: 16 - AR510: 2 - AR1200 series, AR2201-48FE, AR2202-48FE, and AR2204: 128 - AR2220, AR2220L, AR2220E, and AR2240 and AR3200 equipped with the SRU40 or SRU60: 512 - AR2240 and AR3200 equipped with the SRU80 or SRU100: 1024 - AR2240 and AR3200 equipped with the SRU200: 2048 (When the AR functions as the LAC, the maximum number of L2TP tunnels cannot exceed the number of L2TP groups and is 1024.) - AR3600 equipped with the SRUX5: 2048 (When the AR functions as the LAC, the maximum number of L2TP tunnels cannot exceed the number of L2TP groups and is 1024.) - AR120-S&AR150-S&AR160-S&AR200-S: 16 - AR1200-S series, AR2201-48FE-S, and AR2204-S: 128 - AR2220-S and AR2240-S: 512 - AR3200-S equipped with the SRU40: 512 - NE16EX-6 and NE16EX-8 equipped with the MSP20: 2048 (When the AR functions as the LAC, the maximum number of L2TP tunnels cannot exceed the number of L2TP groups and is 1024.) - NE16EX-6 and NE16EX-8 equipped with the MSP40: 4096 (When the AR functions as the LAC, the maximum number of L2TP tunnels cannot exceed the number of L2TP groups and is 1024.) - AR530: 16

Does the AR support L2TP
The AR supports L2TPv2 from V200R002C00.

Number of DHCP access users supported by the AR
Hi, I cannot answer this question. For details about product specifications, dial 4008229999 to ask for artificial service and consulting.

How to perform DNS resolution for L2TP users on the AR
Host resolution is implemented through DNS. You can run the ip host command on the device to configure static DNS entries.

Method used to configure L2TP users logout on the AR
The methods of enabling the L2TP users to logout are as follows: when all users of L2TP tunnel go offline, 1. Run the display l2tp tunnel [ tunnel-item | tunnel-name ] command in any view to check tunnel ID that needs to be disconnected or the remote tunnel name.2. Run the reset l2tp tunnel { peer-name | } command in the user view to disconnect the tunnel forcibly according to local tunnel ID or remote tunnel name. As a result, all users on the tunnel go offline.When a L2TP user goes offline, 1. Run the display l2tp session [ destination-ip | session-item | source-ip ] command in any view to check the local session ID that needs to be disconnected according to remote IP address. 2. Run the reset l2tp session session-id

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top