By default, each NQA test instance has 50 historical records.
Command: records history
For example, set the maximum number of historical records of the NQA test instance user test to 30.
[Huawei] nqa test-instance user test
[Huawei-nqa-user-test] test-type icmp
[Huawei-nqa-user-test] records history 30 (The value ranges from 1 to 10, and the default value is 5.)
-Query command:
Run the display nqa-parameter command in the NQA view. The value of the records history field is the maximum number of historical records of the NQA test instance.
By default, an S series switch (except the S1700) saves a maximum of 10 historical commands for each user. You can run the history-command max-size size-value command in the user interface view to reset the number of historical commands that can be saved. The maximum number is 256.
You can also run the display history-command [ all-users ] command in any view to check historical commands stored on a switch.
Note:
If all-users is not specified in this command, the historical commands entered by the current user are displayed.
If all-users is specified in this command, the historical commands entered by all users are displayed. (Only users at level 3 or a higher level can specify this parameter in this command.)
If you have more questions, you can seek help from following ways:
