Default IKE algorithm on AR series routers

1

Huawei AR series routers can be configured with the IKE authentication algorithm and encryption algorithm.
In V200R005C90 and earlier versions, the IKE authentication algorithm SHA-1 and IKE encryption algorithm DES-CBC are used by default.
In V200R005C90 and earlier versions, the IKE authentication algorithm SHA-256 and IKE encryption algorithm AES-CBC-256 are used by default.

Other related questions:
Method used to modify the IKE algorithm on AR series routers
Huawei AR series routers can be configured with the IKE authentication and encryption algorithms. The configuration procedure is as follows: 1. Run the ike proposal proposal-number command to create an IKE proposal and enter the IKE proposal view. 2. Run the authentication-algorithm { aes-xcbc-mac-96 | md5 | sha1 | sha2-256 | sha2-384 | sha2-512 | sm3 } command to configure an authentication algorithm for the IKE proposal. Starting from V200R002C00, the AR supports aes-xcbc-mac-96. Starting from V200R005C10, the AR supports SHA2-256, SHA2-384, and SHA2-512. Starting from V200R005C00, the AR supports SM3, but the NE16EX series do not support SM3. It is recommended that you do not use MD5 and SHA-1. Otherwise, security defense cannot be met. 3. Run the encryption-algorithm { des-cbc | 3des-cbc | aes-cbc-128 | aes-cbc-192 | aes-cbc-256 | sm4 } command to configure an encryption algorithm for the IKE proposal. Starting from V200R005C90, the AR supports SM4. It is recommended that you should not use DES-CBC and 3DES-CBC. Otherwise, security defense cannot be met.

Default SLB algorithm on the USG9000 series
The default SLB algorithm on the USG9000 series is round robin.

What is the default load balancing mode
By default, Eth-Trunks work in manual load balancing mode.

Is multicast enabled on the AR router by default
By default, the multicast function of the AR router is disabled.

Check whether the AR routers Console login has a default password.
The AR routers Console password for logging in to the default support status: -all models AR equipment in V200R005C20 and previous versions have no default password. -all models AR equipment after V200R005C20 version has a default password, the default user name is admin, by default, the password is:Admin@huawei.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top