Does the AR enabled with IPSec support dynamic routes

2

The AR enabled with IPSec only supports static routes.

Other related questions:
Dynamic routing protocols supported by an AR
Besides static routing protocols, ARs also support dynamic routing protocols such as the Routing Information Protocol (RIP), Open Shortest Path First (OSPF), Intermediate System to Intermediate System (IS-IS), and Border Gateway Protocol (BGP). Routes that are discovered by dynamic routing protocols are called dynamic routes.

S series switches' support for routing
For details about routing features supported by S series switches of different models: - S12700: See "IP Unicast Routing" in S12700 Product Use Precautions. - S7700 and S9700: See "IP Unicast Routing" in S7700&S9700 Product Use Precautions. - S9300: See "IP Unicast Routing" in S9300&S9300E&S9300X Product Use Precautions. - S1720, S2700, S3700, S5700, and S6700: See "IP Unicast Routing" in S1720&S2700&S3700&S5700&S6700 Product Use Precautions. - S600: See "IP Unicast Routing" in S600-E Product Use Precautions.

The USG supports dynamic routing protocols.
The USG2000 & 5000 & 6000 firewall can support or configure all dynamic routing protocols, including RIP, OSPF, IS-IS, and BGP.

How to configure a route through the web NMS on an AR router
To configure a static route, do as follows: 1. Choose IP Service > Route > Static Route Configuration. . 2. Click Create in the IPv4 Static Route Configuration Table or IPv6 Static Route Configuration Table according to requirements to enter the parameter configuration page. 3. Configure parameters one by one, and click OK to complete the configuration. To configure a dynamic route, do as follows: - Configure the OSPF function. 1. Choose IP Service > Route > Dynamic Route Configuration > OSPF to enter the OSPF List page. 2. Click Create, enter parameters, and click ok to create an OSPF process. 3. On the OSPF List page, select the new OSPF process, click Advanced at the right side, click the Basic or Advanced tab page, and modify the OSPF process parameters according to requirements. - Configure the BGP function. 1. Choose IP Service > Route > Dynamic Route Configuration > BGP, configure parameters, and click Apply. 2. On the Peer Configuration List page, click Create, enter parameters, and click ok to create a BGP neighbor.

Does the VLANIF interface support IPSec on the AR
The VLANIF interface on the Huawei AR router does not support IPSec.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top