Are there any special configuration requirements when connecting IP phones to an AR1200

10

When connecting IP phones to the interfaces on the main control board of an AR1200, configure the virtual local area network (VLAN) priority to ensure the priority of packets.

Other related questions:
What are special configurations when the AR1200 connects to an IP phone
When an IP phone connects to an interface on the SRU of the AR1200, the VLAN priority needs to be configured.

Is there any special requirement on switches or network interface cards in an IP SAN?
The IP storage area network (SAN) has no special requirement on switches or network interface cards (NICs). The ordinary Ethernet switches and NICs can guarantee the operations in the IP SAN. The NICs or iSCSI HBAs with the TCP/IP Offload Engine (TOE) function are better.

Is the CT license required when the IP phone connects to the AR
The CT license is used to implement call transfer over a trunk. That is, calls received over one trunk are forwarded over another trunk. The CT license is not required when the IP phone connects to the AR.

When the eSpace 7900 series or 8950 IP phone is connected to the PC in series, how to configure different VLANs for the phone and PC?
The IP phone and PC can be in different VLANs, but in the scenario where the Link Layer Discovery Protocol (LLDP) is used, the IP phone and PC cannot be allocated in different VLANs.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top