Connector of the CXP high-speed cable


Connector (X1/X2) of the CXP high-speed cable on the MA5616: CXP84 male connector

Other related questions:
Cables of the Console Interface on an AR
The console cable is used to connect the RJ45 connector of the console interface and DB9 connector of the serial interface of the PC.

Whether the USG2000 slots fall into high-speed and low-speed ones

Clearing of the LSR_WILL_DIE alarm after the fan speed is adjusted to high speed
The LSR_WILL_DIE alarm is a module alarm and is affected by the temperature. It is reported when the module is in the high temperature environment and ages quickly. You are advised to replace the module or board even if the LSR _ WILL _ DIE alarm is cleared by increasing the fan speed.

High-speed networks
A high-speed network is an internal network among BMSs and provides unlimited bandwidth for connecting BMSs in the same AZ. If you want to deploy services requiring high throughput and low latency, you can create high-speed networks. Currently, the BMS supports high-speed networks with a maximum bandwidth of 10 Gbit/s.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top