Can I configure a home position when there is no PTZ of VCN3000 plus 6225-VRZ and 6125-WDL-P?

You can preset continuous presence and continuous presence polling to adjust the participant presence position on the SMC2.0 as follows: 1. Log in to Huawei Enterprise Technical Support Website. 2. Search for SMC2.0. 3. Select the version number to obtain the product documentation. 4. Choose Operation and Maintenance > Advanced Settings > Presetting a Conference in the product documentation.

The possible cause is as follows: Another user disables the home position. The home position configuration uses the data that is uploaded at last. You can query the user operations on a device through log management on the C/S client.

You cannot manually add static routes for the VCN3000.

IPC6231-WD-VRZ can report the following types of alarms to the VCN3000 platform: motion detection, lens block, and Boolean value output. IPC6231-WD-VRZ can report only Boolean value output alarms to eSight.

The PTZ control priority indicates the control priority of a user on the PTZ when the PTZ is locked. When a user locks a PTZ, only the user or higher-level users can unlock the PTZ. The PTZ control priority of users is not differentiated if the PTZ is not locked. The PTZ control priority varies depending on the server software version. When the server is of the eSpace VCN3000 V100R001C01 version: The PTZ control priority is divided into nine levels. A smaller value indicates a higher priority. When the server is of the eSpace VCN3000 V100R002C00 version: The PTZ control priority is divided into 32 levels. A smaller value indicates a higher priority.