Can I view the camera status on the VCN after the camera is removed?

The support for camera rotation control is as follows: The SMC1.0 supports camera rotation control. The SMC2.0 supports camera rotation control on the conference control page.

To control participant cameras after the SMC2.0 schedules a conference: Select a participant whose camera needs to be controlled from conferences that are held on the SMC2.0. Select the button for adjusting the camera in the conference control function area. On the control page that is displayed, move the camera upwards, downwards, rightwards, and leftwards and zoom the camera. The operations are as follows: 1. Log in to the web page of the terminal as the admin user. 2. Choose System Settings > Input/Output > Video Input. 3. In Common Camera Settings, set Remote control to Allow. For the detailed control method, see Control conference.

VGA is not supported. The VPC500 supports only DVI, YPrPb, or SDI video outputs.

You can add cameras one by one or in batches using a wizard or on the device management tab page. The VCN3000 supports cameras that comply with the HWSDK, HIKSDK, DHSDK, AXISSDK, ONVIF, TEYES, or GB/T 28181 protocol. For details about how to add cameras to the VCN3000, see the eSpace VCN3000 Product Documentation. Visit the Huawei Enterprise Technical Support website and download the eSpace VCN3000 Product Documentation of the required version.