Can I use a keyboard to control the PTZ of the VCN?

After the USB flash drive is used to connect to the wireless or wired keyboard and mouse, you can use the keyboard and mouse to perform operations on the remote control UI, implementing the same functions as keys on the remote control. Remote control VS Keyboard Arrow keys Arrow keys Deletion key Delete key Return key Exit key Confirm key Enter key Focal length extending Plus key on the numeric keypad Focal length reduction Minus key on the numeric keypad Enter letters, digits, text, or symbols and combination of digits and symbols. You can use the mouse to tap the UI icons, prompt arrow icons, and text boxes.

After the USB flash drive is used to connect to the wireless or wired keyboard and mouse, you can use the keyboard and mouse to perform operations on the remote control UI, implementing the same functions as keys on the remote control. Remote control VS Keyboard Arrow keys Arrow keys Deletion key Delete key Return key Exit key Confirm key Enter key Focal length extending Plus key on the numeric keypad Focal length reduction Minus key on the numeric keypad Enter letters, digits, text, or symbols and combination of digits and symbols. You can use the mouse to tap the UI icons, prompt arrow icons, and text boxes.

You can use a remote control of an endpoint to separately control the VPC600 after setting the IR mode to LOCAL (or OFF in earlier versions) on the camera.

To control the VPC500 camera separately using a remote control, set the IR mode to OFF.

The PTZ control priority indicates the control priority of a user on the PTZ when the PTZ is locked. When a user locks a PTZ, only the user or higher-level users can unlock the PTZ. The PTZ control priority of users is not differentiated if the PTZ is not locked. The PTZ control priority varies depending on the server software version. When the server is of the eSpace VCN3000 V100R001C01 version: The PTZ control priority is divided into nine levels. A smaller value indicates a higher priority. When the server is of the eSpace VCN3000 V100R002C00 version: The PTZ control priority is divided into 32 levels. A smaller value indicates a higher priority.