Can I change the cloned camera name of the VCN?

Huawei provides a detailed operation guide for updating linked clone VM templates. You can obtain this guide in the following ways: 1. See the "Service Provisioning" section in FusionCloud Desktop Solution Documentation. You can obtain this documentation at . 2. Contact the project coordinator via WeChat, email, or phone. 3. Post your request on Huawei's cloud computing forum (http://support.huawei.com/huaweiconnect/enterprise/forum-775.html). 4. Contact Huawei technical support by dialing the 400 hotline.

The site name can be displayed in the lower-right, lower-left, upper-right, or upper-left corner of the local video. By default, the site name is displayed in the lower-right corner. To adjust the display position of the site name, use either of the following methods: 1. On the remote control UI, choose Advanced > Settings > Display > Personalize and set Display position. 2. Log in to the web page, choose System Settings > Display > Site Name, and set Position of site name.

The site name can be displayed in the lower right, lower left, upper right, or upper left corner of the local video. By default, the site name is displayed in the lower right corner. To adjust the display position of the site name, use either of the following methods: On the user interface, choose Advanced > Settings > Display > Personalize and set Display position. On the web interface, choose System Settings > Display > Site Name and set Position of site name.

The root directory name of the camera list is the platform NE name.