Huawei provides a detailed operation guide for updating linked clone VM templates. You can obtain this guide in the following ways:
1. See the "Service Provisioning" section in FusionCloud Desktop Solution Documentation. You can obtain this documentation at .
2. Contact the project coordinator via WeChat, email, or phone.
3. Post your request on Huawei's cloud computing forum (http://support.huawei.com/huaweiconnect/enterprise/forum-775.html).
4. Contact Huawei technical support by dialing the 400 hotline.
The VPC500 camera can connect to an external wide angle lens. A thread port is reserved around the VPC500 camera. You can directly install a wide angle lens of the corresponding port type without removing the existing lens.
The VPC600/VPC620 camera uses the HD-VI video port that supports serial port control signals, transparent transmission of infrared signals, and 12 V power input. After the camera is connected to a TE endpoint, the camera is powered and does not require the external power.
However, you can also connect the external power supply to the camera, which will not damage the camera. In this case, the camera is powered by the external power supply and the HD-VI cable stop powering the camera.
An external power cable can be connected to the VPC600 or VPC620. After the connection, the external power supply is used and the HD-VI cable does not supply power to the camera.
If you have more questions, you can seek help from following ways:
