How can I stop all recording on VCN3000?

Only some logs are recorded in the log buffer. Logs that can be recorded in the log buffer are restricted. -By default, only logs at levels lower than the warning logs (level 4) are recorded in the log buffer. Therefore, logs at levels 0 to 4 are recorded to the log buffer and logs at levels 5 and 7 are not recorded. You can run the info-center source { module-name | default } channel { channel-number | channel-name } log { state { off | on } | level severity } command to set the levels of logs that can be recorded to the log buffer. -The log buffer space is limited. If the number of logs in the log buffer reaches the maximum value, new logs will replace the existing logs that are placed earlier in the log buffer until all the new logs are stored. By default, the log buffer can hold a maximum of 512 logs. You can run the info-center logbuffer size size command to set the maximum number to 1024.

If multiple UOAs are installed on the same server, log in to the UOA server as different users. To start the UOA process, do as follows: a. Log in to the UOA server as the uoausr user. b. Go to the path where the start.sh file is stored. The start.sh file is stored under /home/uoausr/uoasetup/shell by default. c. Run the uoa_start.sh command to start the UOA. d. Run the p command to check the UOA operating status. If the following information is displayed, the UOA process is started: uoausr 5583 1 0 10:44 pts/3 00:00:00 uoa_lma uoausr 5599 5583 0 10:44 pts/3 00:00:00 Naming_Service -ORBEndPoint iiop ://0.0.0.0:6705 uoausr 5610 5583 2 10:44 pts/3 00:00:00 uoa_server uoausr 5650 5583 0 10:44 pts/3 00:00:00 uoa_trace_agent uoausr 5665 5583 0 10:44 pts/3 00:00:00 uoa_perf_agent uoausr 5695 5583 0 10:44 pts/3 00:00:00 uoa_cli uoausr 5703 5583 0 10:44 pts/3 00:00:00 uoa_soapadapter 0 uoausr 5706 5583 0 10:44 pts/3 00:00:00 uoa_ltadapter 0 uoausr 5721 5583 0 10:44 pts/3 00:00:00 uoa_sxpadapter 0 uoausr 5723 5583 0 10:44 pts/3 00:00:00 uoa_soapagent uoausr 5775 5583 0 10:44 pts/3 00:00:00 uoa_log_agen To stop the UOA process, do as follows: a. Log in to the UOA server as the uoausr user. b. Go to the path where the stop.sh file is stored. The stop.sh file is stored under /home/uoausr/uoasetup/shell by default. c. Run the uoa_stop.sh command to stop the UOA. The following information is displayed: Are you sure to stop UOA?(y/n) ==> d. Input y and press Enter. If the following information is displayed, the UOA process is stopped. kill uoa_lma 5583 kill uoa_server 5610 kill uoa_soapadapter 5703 kill uoa_ltadapter 5706 kill uoa_soapagent 5723 kill uoa_sxpadapter 5721 kill Naming_Service 5599 kill uoa_cli 5695 kill uoa_log_agent 5775 kill uoa_trace_agent 5650 kill uoa_perf_agent 5665

Due to information security requirements of the video surveillance software, recordings cannot be deleted temporarily.

The recording plan is classified into PU recording plan and server recording plan. 1. PU recording means that video is recorded and saved to cameras. This function is available only for cameras that support video recording and have been authenticated by Huawei. 2. Server recording means that video is recorded and saved to server. Log in to the C/S client, go to Videos or Plan to configure scheduled recording.