Homepage FAQ Intelligent Video Surveillance

Why are recordings of a camera lost after the VCN500 runs for one month?

Check whether the camera uses an officially released version. If the version is not an official version, upgrade the camera version and check whether the fault is rectified. If the fault persists, contact Huawei technical support engineers for assistance.

Other related questions:

Why is the DHCP configuration lost on an AR after a while

If Auto-Config is enabled, the AR will periodically clear all DHCP configurations, causing DHCP configuration loss. To solve the problem, perform the following steps: 1. Run the undo autoconfig enable command on the AR to disable Auto-Config. 2. Wait for 4 or 5 minutes and run the display autoconfig-status command to check the Auto-Config status. If the value of Running is NO, the Auto-Config function has been disabled. 3. Perform the configuration and run the save command.

Are recordings lost after the VCN is added to the cluster environment?

Creating a cluster will not result in recording loss.

If you have more questions, you can seek help from following ways:

To WeiKnow To Live Chat

Enterprise

Consumer

Corporate

Carriers

Why are recordings of a camera lost after the VCN500 runs for one month?

Other related questions:

If you have more questions, you can seek help from following ways: