Homepage FAQ Intelligent Video Surveillance

What can I do if live video on the VCN500 LDU has delay?

If multiple live video channels are enabled on the VCN500 LDU for a long time, video decoding performance of the VCN500 LDU is affected, resulting in live video delay. Enable the sequencing function to obtain video streams at a certain interval and check whether the fault is rectified. If the fault persists, contact Huawei technical support engineers for assistance.

Other related questions:

What can I do if the live video pane displays no image at daytime?

Log in to the IPC web page as the admin user. (For details about the default password of the admin user, see the User Guide of the required IPC model. Adjust the camera aperture. Check whether the fault is rectified. If yes, no further operation is required. If no, contact the service provider. ----End

What can I do if water ripples occur on live video images of the IPC1701?

Water ripples occur when the camera operating frequency or standard does not match the power frequency. Rectify the fault as follows: 1. Adjust the camera operating frequency to 50 Hz or 60 Hz. 2. Check whether the camera standard matches the local power frequency.

Live video flashes or disappears when you click a live video pane during live video viewing on a PC connected to multiple monitors.

The possible cause is that Windows Aero is enabled. To disable Windows Aero, perform the following operations: 1. Right-click in a blank area on the PC and choose Customize. 2. Select a non-Aero theme.

How does the VCN500 connect to a monitor to use LDU?

V100R002C10 and later versions support connection to monitors through the HDMI interface. Users can configure services on the LDU.

Does the VCN500 LDU connect to the monitor through the HDMI interface?

V100R002C10 and later versions support connection to monitors through the HDMI interface. Users can configure services on the LDU.