On the iMana or iBMC WebUI, you can enable a server to start automatically after the PSUs are powered.
For V2 servers, see http://support.huawei.com/ehedex/pages/DOC1000010818YEE0409N/18/DOC1000010818YEE0409N/18/resources/iMana200/en/rh/help/bmc_help_0034.html.
For V3 servers, see http://support.huawei.com/ehedex/pages/DOC1000010818YEE0409N/18/DOC1000010818YEE0409N/18/resources/hedex/en/rackserver/hedex_rackserver_500006.html.
After being powered off, the TE Mobile is deregistered and becomes offline in the SC. When the TE Mobile is powered on and started again, the TE Mobile can still be used and registered. Similar to VC100, the TE Mobile does not have a software activation license. The TE Mobile functions like an app on a common mobile phone.
The possible causes are as follows:
1 The alarm linkage action of linking preset positions has been configured for the camera.
2. Preset positions have been configured for the camera during sequencing resource setting. The solution is as follows:
Step 1: Check whether the alarm linkage action of linking preset positions has been configured for the camera.
Step 2 Check whether the camera exists in the sequencing resources and preset positions have been configured for the camera.
If you have more questions, you can seek help from following ways:
