The X8000 server nodes do not have a default iMana (BMC) IP address. Therefore, it is recommended that the RMC be used to implement centralized management.
When using an X8000 server node for the first time, query the iMana management port IP address of the node on the RMC. You can log in to the RMC command line interface using Telnet or SSH, and run the following command to query the iMana management network port IP address, DHCP/static mode, and gateway IP address:
rmcget -l blade_id -t eth0 -d info
In this command:
id indicates the serial number of the server node. The value range is 01a to 40a and 01b to 40b.
eth0 indicates the iMana management network port.
The default iMana user name and password are as follows:
Default user name: root
Default password: Huawei12#$
The default user name for logging in to the conference management and node management modules of the RM is admin. The password is empty. The default user name and password for logging in to the RMs of some old versions are admin and ADMIN respectively.
The default user name and password for logging in to an MCU through the serial port:
1. User name: administrator; password: Change_Me
2. User name: admin; password: Change_Me
3. User name: user; password: Change_Me
If an MCU is not security-hardened, the password is the same as the user name.
