The configuration of the AR router to obtain the DNS address from the ISP provider is as follows.
[Huawei] interface dialer 0
[Huawei-Dialer0] PPP IPCP DNS admit-any //configure the router passively receive the address of the DNS server which was specified by other end
[Huawei-Dialer0] PPP IPCP DNS request //router active request to end the specified DNS server address
After a Streaming service user is used to submit a topology, the task must be continuously run by the user. During topology running, the Worker process may need to be restarted to keep the topology running. Changing the service user password will affect topology running. If the user password is changed, you can delete the original topology and submit another one.
You can obtain the UltraPath from Tools Package.zip.
Note:
Log in to Huawei Enterprise Technical Support, choose Support > Video Surveillance > Video Surveillance Platforms > eSpace IVS. Click Downloads and select V100R001C30. Download the Tools Package.zip package.
If no disk array needs to be mounted, you do not need to install the UltraPath.
You can download the client installation package from the server. The following describes the detailed procedure:
1. Use the WinSCP tool to log in to the server as the root user.
Note:
To download the WinSCP installation package, visit https://winscp.net/eng/download.php.
2. Go to /opt/FileServer/version/CU_Release/PC.
3. Download HW_IVS_Client.exe to the local PC.
If you have more questions, you can seek help from following ways:
